Fisher Capital Management
: Government Bond Markets Global Outlook Part 2 - Our position remains unchanged; any existing exposure to bonds should be further reduced in favor of US & Euro equities.
The European Central Bank appears to share this view, although it has warned that the recovery is likely to remain uneven, and has kept short-term rates at very low levels. The bond markets have therefore continued to receive considerable support from the economic background and the actions of the central bank.
Fisher Capital Management Seoul, South Korea: However, these factors have been much less important than the fears about the debt problems in Greece and in other weaker members of the euro-zone. After considerable prevarication, due primarily to strong German opposition to a bail-out; an agreement has been reached amongst the member countries that, in conjunction with the IMF, they will provide support for Greece if this becomes necessary to prevent a defaulton its sovereign debts.
But the details of the agreement are very vague, and there is certainly no guarantee that the country can carry out its promises to introduce significant reductions in spending levels to reduce the size of its debts. The agreement has helped the country to issue a further 5 billion bond; but it was forced to offer an interest rate of 5.9% on a seven-year bond, 325 basis points above the equivalent German bund, and that issue has subsequently moved to a substantial discount. Conditions have also been made worse by the downgrade in Portugals credit rating, and so the pressures on the bond markets are continuing.
Fisher Capital Management Seoul, South Korea: The gilt edged market has coped fairly well so far with the latest weakness in the bond market, an inadequate response in the latest Budget to the debt problems in the UK, and a warning from the Fitch rating agency that the governments timetable for reducing the fiscal deficit was frankly too slow, and that the countrys credit rating was at risk. The economic recovery remains very slow, and the Bank of England is holding short-term interest rates close to zero, so the market is receiving some support; but in all the circumstances it is perhaps surprising that it has managed to perform so well.
Fisher Capital Management Seoul, South Korea: The economic background in the UK remains depressed, but is slowly improving. Retail sales bounced back strongly; the public sector continued its recruitment programmed; and there has been a pickup in activity in both the manufacturing and service sectors of the economy.
It was not surprising therefore that the Bank of England kept short-term interest rates unchanged at the latest meeting of its Monetary Policy Committee and even suggested that it would be prepared to reactivate its quantitative easing programmed if this proved to be necessary. But this may not be enough to sustain gilt edged prices at current levels.
Fisher Capital Management Seoul, South Korea: The latest Budget statement is forecasting a slightly lower fiscal deficit of 167 billion in the 2009/10 fiscal year, and a halving of the deficit by 2013/14; but there is considerable skepticism in the markets about the growth assumptions underlying the figures, and about the willingness of the politicians to address the real problems
involved in reducing the deficit. If there is no credible plan to achieve this reduction, the country may well lose its AAA credit rating. Prospects have therefore become even more uncertain, and a move to higher yield levels seems unavoidable.
Fisher Capital Management Seoul, South Korea: The Japanese bond market is slightly weaker over the past month. It is likely that this year, for the first time, bond issuance may provide greater support for the fiscal deficit than tax revenues. This has already led to a downgrade on Japanese public debt by Standard and Poors, and with new bond issuance this year estimated to reach 44,300 billion, and to reach 55,300 billion by 2013, further downgrades seem likely. Japanese institutional investors are used to financing massive deficits, but it seems unlikely that deficits of this size can be adequately financed at present yield levels. Prospects for the Japanese market therefore remain unattractive.
Wednesday, January 26, 2011
Fisher Capital Management: Government Bond Markets Global Outlook Part2
Fisher Capital Management: Government Bond Markets Global Outlook Part 2 - Our position remains unchanged; any existing exposure to bonds should be further reduced in favor of US & Euro equities.
The European Central Bank appears to share this view, although it has warned that the recovery is likely to remain uneven, and has kept short-term rates at very low levels. The bond markets have therefore continued to receive considerable support from the economic background and the actions of the central bank.
Fisher Capital Management Seoul, South Korea: However, these factors have been much less important than the fears about the debt problems in Greece and in other weaker members of the euro-zone. After considerable prevarication, due primarily to strong German opposition to a bail-out; an agreement has been reached amongst the member countries that, in conjunction with the IMF, they will provide support for Greece if this becomes necessary to prevent a defaulton its sovereign debts.
But the details of the agreement are very vague, and there is certainly no guarantee that the country can carry out its promises to introduce significant reductions in spending levels to reduce the size of its debts. The agreement has helped the country to issue a further 5 billion bond; but it was forced to offer an interest rate of 5.9% on a seven-year bond, 325 basis points above the equivalent German bund, and that issue has subsequently moved to a substantial discount. Conditions have also been made worse by the downgrade in Portugals credit rating, and so the pressures on the bond markets are continuing.
Fisher Capital Management Seoul, South Korea: The gilt edged market has coped fairly well so far with the latest weakness in the bond market, an inadequate response in the latest Budget to the debt problems in the UK, and a warning from the Fitch rating agency that the governments timetable for reducing the fiscal deficit was frankly too slow, and that the countrys credit rating was at risk. The economic recovery remains very slow, and the Bank of England is holding short-term interest rates close to zero, so the market is receiving some support; but in all the circumstances it is perhaps surprising that it has managed to perform so well.
Fisher Capital Management Seoul, South Korea: The economic background in the UK remains depressed, but is slowly improving. Retail sales bounced back strongly; the public sector continued its recruitment programmed; and there has been a pickup in activity in both the manufacturing and service sectors of the economy.
It was not surprising therefore that the Bank of England kept short-term interest rates unchanged at the latest meeting of its Monetary Policy Committee and even suggested that it would be prepared to reactivate its quantitative easing programmed if this proved to be necessary. But this may not be enough to sustain gilt edged prices at current levels.
Fisher Capital Management Seoul, South Korea: The latest Budget statement is forecasting a slightly lower fiscal deficit of 167 billion in the 2009/10 fiscal year, and a halving of the deficit by 2013/14; but there is considerable skepticism in the markets about the growth assumptions underlying the figures, and about the willingness of the politicians to address the real problems
involved in reducing the deficit. If there is no credible plan to achieve this reduction, the country may well lose its AAA credit rating. Prospects have therefore become even more uncertain, and a move to higher yield levels seems unavoidable.
Fisher Capital Management Seoul, South Korea: The Japanese bond market is slightly weaker over the past month. It is likely that this year, for the first time, bond issuance may provide greater support for the fiscal deficit than tax revenues. This has already led to a downgrade on Japanese public debt by Standard and Poors, and with new bond issuance this year estimated to reach 44,300 billion, and to reach 55,300 billion by 2013, further downgrades seem likely. Japanese institutional investors are used to financing massive deficits, but it seems unlikely that deficits of this size can be adequately financed at present yield levels. Prospects for the Japanese market therefore remain unattractive
The European Central Bank appears to share this view, although it has warned that the recovery is likely to remain uneven, and has kept short-term rates at very low levels. The bond markets have therefore continued to receive considerable support from the economic background and the actions of the central bank.
Fisher Capital Management Seoul, South Korea: However, these factors have been much less important than the fears about the debt problems in Greece and in other weaker members of the euro-zone. After considerable prevarication, due primarily to strong German opposition to a bail-out; an agreement has been reached amongst the member countries that, in conjunction with the IMF, they will provide support for Greece if this becomes necessary to prevent a defaulton its sovereign debts.
But the details of the agreement are very vague, and there is certainly no guarantee that the country can carry out its promises to introduce significant reductions in spending levels to reduce the size of its debts. The agreement has helped the country to issue a further 5 billion bond; but it was forced to offer an interest rate of 5.9% on a seven-year bond, 325 basis points above the equivalent German bund, and that issue has subsequently moved to a substantial discount. Conditions have also been made worse by the downgrade in Portugals credit rating, and so the pressures on the bond markets are continuing.
Fisher Capital Management Seoul, South Korea: The gilt edged market has coped fairly well so far with the latest weakness in the bond market, an inadequate response in the latest Budget to the debt problems in the UK, and a warning from the Fitch rating agency that the governments timetable for reducing the fiscal deficit was frankly too slow, and that the countrys credit rating was at risk. The economic recovery remains very slow, and the Bank of England is holding short-term interest rates close to zero, so the market is receiving some support; but in all the circumstances it is perhaps surprising that it has managed to perform so well.
Fisher Capital Management Seoul, South Korea: The economic background in the UK remains depressed, but is slowly improving. Retail sales bounced back strongly; the public sector continued its recruitment programmed; and there has been a pickup in activity in both the manufacturing and service sectors of the economy.
It was not surprising therefore that the Bank of England kept short-term interest rates unchanged at the latest meeting of its Monetary Policy Committee and even suggested that it would be prepared to reactivate its quantitative easing programmed if this proved to be necessary. But this may not be enough to sustain gilt edged prices at current levels.
Fisher Capital Management Seoul, South Korea: The latest Budget statement is forecasting a slightly lower fiscal deficit of 167 billion in the 2009/10 fiscal year, and a halving of the deficit by 2013/14; but there is considerable skepticism in the markets about the growth assumptions underlying the figures, and about the willingness of the politicians to address the real problems
involved in reducing the deficit. If there is no credible plan to achieve this reduction, the country may well lose its AAA credit rating. Prospects have therefore become even more uncertain, and a move to higher yield levels seems unavoidable.
Fisher Capital Management Seoul, South Korea: The Japanese bond market is slightly weaker over the past month. It is likely that this year, for the first time, bond issuance may provide greater support for the fiscal deficit than tax revenues. This has already led to a downgrade on Japanese public debt by Standard and Poors, and with new bond issuance this year estimated to reach 44,300 billion, and to reach 55,300 billion by 2013, further downgrades seem likely. Japanese institutional investors are used to financing massive deficits, but it seems unlikely that deficits of this size can be adequately financed at present yield levels. Prospects for the Japanese market therefore remain unattractive
Fisher Capital Management Seoul Korea: Market Overview 1st Quarter 2010
Fisher Capital Management Seoul Korea: Market Overview 1st Quarter 2010 Fisher Capital Management Seoul Korea: Market Overview 1st Quarter 2010 - India is in a sweet spot. The central government budget which set the tone for reducing fiscal deficit and an unexpected increase in the policy rate to rein in inflation has convinced the markets and economists that India is on its way to having a robust economic growth. Industrial output also continued to grow at a fast pace in January as companies produced more cars and cement. In the fiscal year 2011 that ends in March 2011, GDP growth of 8. 5% is achievable. Long-term predictions for the southwest monsoons are expected to be normal, giving a boost to agricultural production and domestic demand.
Triad Boiler Room Systems Launched New Commercial Boilers
Triad Boiler Room Systems Launched New Commercial Boilers
Fisher Capital on Boiler Room Equipment, Inc: Triad Boiler Systems manufactures uniquely rugged small-footprint hot water boilers, steam boilers, and radiant heating systems. All our boilers use 12 gauge firetubes in compact vessels that fit through very small doorways! Inputs range up to 2,000,000 BTU's. Create a highly efficient system with millions of BTU's by sequencing a string of these modular vessels.
TRIAD's commercial boilers and industrial grade Hot Water Heating, Domestic Hot Water, and Steam boilers are used in a wide variety of applications. Our commercial boilers are used at schools, universities, apartments, hospitals, office buildings, retirement communities, and churches. Industrial uses have included bakeries, smelting operations, food processing, quenching systems, and various heating applications for manufacturing. Triads’ modular boilers and radiant heating systems can be natural gas fired, oil fired, or dual fuel fired. For simplicity of operation and maintenance, all controls on our boilers are well known, off-the-shelf products. There area no proprietary parts on these boilers! This simplicity of operation is part of our philosophy, and an important reason why our customers return to us again and again.
TRIAD has been manufacturing high-quality boilers since 1926, and developed the modular boiler concept with primary/secondary piping, receiving a patent for it in 1967. We put this experience, knowledge, and expertise into every boiler.
We believe in quality - it is the overriding characteristic driving our company. This is why we manufacture extremely rugged, well-designed hot water and steam boilers that can provide decades of dependable service. We welcome your inquiries.
Benefits of Modularity
TRIAD's elegantly simple design maintains consistent water volume where heat is required.
• Boilers are activated sequentially, drawing water from the main loop into the next hot water boiler until the heating need is meet.
• firing boilers remaining isolated, so no heated water circulates through cold boilers.
• During most of the year the unfired boilers provide additional backup.
• Outdoor temperatures and loop water temperatures are constantly monitored.
Fisher Capital on Boiler Room Equipment, Inc: The efficiency of this design is most apparent during warmer months, when a conventional hydronic heating or steam boiler could still be operating at full capacity.
Primary-Secondary Piping
TRIAD integrates modularity with a single pipe primary-secondary system. TRIAD was the first company to employ a Primary-Secondary concept. It operates with two loops, (i) the primary loop, or building main loop, and (ii) smaller secondary loops off of each hot water boiler, which supply heated water to the primary loop.
Upon a call for heat, the boiler pump begins pushing the return water into the boiler and out through the secondary loop, supplying this hot water up into the primary loop (the main header), where it mixes with the cooler return water from the main loop of the building.
• Supply and return water are blended, avoiding the need for expensive and unreliable mixing valves commonly used in two pipe systems.
• The secondary loop isolates each hot water boiler, resulting in a very efficient system that minimizes thermal shock.
Control Panel
TRIAD Boilers can be sequenced by the use of our control panel that provides many attractive features:
• Temperature set-back when less heat is required, such as nights and weekends.
• Adjustments for latent heat, to take advantage of hot boiler water that retains heat after the burner shuts down.
• Outdoor reset based on atmospheric temperatures.
• Monitoring of return water temperatures to maintain accurate heating output.
It is also very easy to sequence our boilers using the panel of any other major manufacturer.
Packaged Product
Fisher Capital on Boiler Room Equipment, Inc: All TRIAD hot water boilers and steam boilers are fully assembled, packaged products, which offer several advantages over boilers that must be assembled at the jobsite
• Onsite labor costs are minimized.
• Quality control is higher at the factory than at the jobsite
• The ease of installation of a packaged boiler allows for quicker start up.
Benefits of Steel Boilers
Easy to Clean
To maintain boiler efficiency, heating surfaces must be kept clean and free of combustion by-products. All TRIAD heating surfaces, especially the firetubes, are easy to access. It is impossible to clean all the heating surfaces of a cast iron boiler, and what can be reached is difficult to clean.
TRIAD also makes it easy to maintain clean water surfaces. The cleaning of the interior of a cast iron boiler is a major undertaking, and even then only the vertical surfaces can be cleaned. The inability to clean the horizontal surfaces can have a significant impact on operating efficiency.
Fisher Capital on Boiler Room Equipment, Inc: Triad Boiler Systems manufactures uniquely rugged small-footprint hot water boilers, steam boilers, and radiant heating systems. All our boilers use 12 gauge firetubes in compact vessels that fit through very small doorways! Inputs range up to 2,000,000 BTU's. Create a highly efficient system with millions of BTU's by sequencing a string of these modular vessels.
TRIAD's commercial boilers and industrial grade Hot Water Heating, Domestic Hot Water, and Steam boilers are used in a wide variety of applications. Our commercial boilers are used at schools, universities, apartments, hospitals, office buildings, retirement communities, and churches. Industrial uses have included bakeries, smelting operations, food processing, quenching systems, and various heating applications for manufacturing. Triads’ modular boilers and radiant heating systems can be natural gas fired, oil fired, or dual fuel fired. For simplicity of operation and maintenance, all controls on our boilers are well known, off-the-shelf products. There area no proprietary parts on these boilers! This simplicity of operation is part of our philosophy, and an important reason why our customers return to us again and again.
TRIAD has been manufacturing high-quality boilers since 1926, and developed the modular boiler concept with primary/secondary piping, receiving a patent for it in 1967. We put this experience, knowledge, and expertise into every boiler.
We believe in quality - it is the overriding characteristic driving our company. This is why we manufacture extremely rugged, well-designed hot water and steam boilers that can provide decades of dependable service. We welcome your inquiries.
Benefits of Modularity
TRIAD's elegantly simple design maintains consistent water volume where heat is required.
• Boilers are activated sequentially, drawing water from the main loop into the next hot water boiler until the heating need is meet.
• firing boilers remaining isolated, so no heated water circulates through cold boilers.
• During most of the year the unfired boilers provide additional backup.
• Outdoor temperatures and loop water temperatures are constantly monitored.
Fisher Capital on Boiler Room Equipment, Inc: The efficiency of this design is most apparent during warmer months, when a conventional hydronic heating or steam boiler could still be operating at full capacity.
Primary-Secondary Piping
TRIAD integrates modularity with a single pipe primary-secondary system. TRIAD was the first company to employ a Primary-Secondary concept. It operates with two loops, (i) the primary loop, or building main loop, and (ii) smaller secondary loops off of each hot water boiler, which supply heated water to the primary loop.
Upon a call for heat, the boiler pump begins pushing the return water into the boiler and out through the secondary loop, supplying this hot water up into the primary loop (the main header), where it mixes with the cooler return water from the main loop of the building.
• Supply and return water are blended, avoiding the need for expensive and unreliable mixing valves commonly used in two pipe systems.
• The secondary loop isolates each hot water boiler, resulting in a very efficient system that minimizes thermal shock.
Control Panel
TRIAD Boilers can be sequenced by the use of our control panel that provides many attractive features:
• Temperature set-back when less heat is required, such as nights and weekends.
• Adjustments for latent heat, to take advantage of hot boiler water that retains heat after the burner shuts down.
• Outdoor reset based on atmospheric temperatures.
• Monitoring of return water temperatures to maintain accurate heating output.
It is also very easy to sequence our boilers using the panel of any other major manufacturer.
Packaged Product
Fisher Capital on Boiler Room Equipment, Inc: All TRIAD hot water boilers and steam boilers are fully assembled, packaged products, which offer several advantages over boilers that must be assembled at the jobsite
• Onsite labor costs are minimized.
• Quality control is higher at the factory than at the jobsite
• The ease of installation of a packaged boiler allows for quicker start up.
Benefits of Steel Boilers
Easy to Clean
To maintain boiler efficiency, heating surfaces must be kept clean and free of combustion by-products. All TRIAD heating surfaces, especially the firetubes, are easy to access. It is impossible to clean all the heating surfaces of a cast iron boiler, and what can be reached is difficult to clean.
TRIAD also makes it easy to maintain clean water surfaces. The cleaning of the interior of a cast iron boiler is a major undertaking, and even then only the vertical surfaces can be cleaned. The inability to clean the horizontal surfaces can have a significant impact on operating efficiency.
http://hubpages.com/hub/Fisher-Capital-Equipment-Update-Market-slams-Fisher-and-Paykel-on-profit-Warning-ii
The share market has come down hard on Fisher & Paykel Appliances - with its shares falling 40 per cent after the company issued a profit warning today.
The whiteware manufacturer's shares, which were worth $2.94 this time last year and worth $1 on Friday, went into free fall and are currently trading at just 60 cents, a 40 cent fall.
Earlier today the company said it expected a net profit of $25 million to $30m, down up to 54 per cent on last year.
Due to the deterioration in the New Zealand dollar, Fisher & Paykel Appliances' total bank debt grew $122 from March last year to $512m at the end of January. It was predicted to be $570m by the end of March.
It is now looking at reviewing its capital structure and alternative sources of capital.
Fisher Capital Equipment Update - Market slams Fisher and Paykel on profit Warning - The market was very concerned the company had to come back with a capital raising, which was unexpected, said Hamilton, Hindin, and Greene director Grant Williamson.
The home appliance market had dropped off in all areas Fisher & Paykel exported to and there did not appear to be too many signs of a turnaround in world housing at the moment, he said.
"I think investors are starting to say; how long is it going to be before conditions change for the company? I think that's the biggest concern."
Williamson said Fisher & Paykel Appliances' wares were sold into most new homes but when very few new homes being built it would have a serious effect on their sales.
A 40 per cent drop in share value was a big hit for the share price to take but that was the general state of the market.
"If any company disappoints the market then the market is very harsh on their share price and we have certainly seen that this morning with Fisher & Paykel Appliances."
The company announced it would not proceed with a capital note issue and was looking an alternative source of capital.
The directors were considering the merits of issuing equity, including to a cornerstone investor.
Williamson said he did not believe a capital notes rising would have been particularly well received.
He did not see any short term bounce in the price until there was clarification around the structure of equity rising. That was expected to be announced in early March.
"At the moment there's still a fair degree of selling in the market place, around the 60c level."- NZPA
The whiteware manufacturer's shares, which were worth $2.94 this time last year and worth $1 on Friday, went into free fall and are currently trading at just 60 cents, a 40 cent fall.
Earlier today the company said it expected a net profit of $25 million to $30m, down up to 54 per cent on last year.
Due to the deterioration in the New Zealand dollar, Fisher & Paykel Appliances' total bank debt grew $122 from March last year to $512m at the end of January. It was predicted to be $570m by the end of March.
It is now looking at reviewing its capital structure and alternative sources of capital.
Fisher Capital Equipment Update - Market slams Fisher and Paykel on profit Warning - The market was very concerned the company had to come back with a capital raising, which was unexpected, said Hamilton, Hindin, and Greene director Grant Williamson.
The home appliance market had dropped off in all areas Fisher & Paykel exported to and there did not appear to be too many signs of a turnaround in world housing at the moment, he said.
"I think investors are starting to say; how long is it going to be before conditions change for the company? I think that's the biggest concern."
Williamson said Fisher & Paykel Appliances' wares were sold into most new homes but when very few new homes being built it would have a serious effect on their sales.
A 40 per cent drop in share value was a big hit for the share price to take but that was the general state of the market.
"If any company disappoints the market then the market is very harsh on their share price and we have certainly seen that this morning with Fisher & Paykel Appliances."
The company announced it would not proceed with a capital note issue and was looking an alternative source of capital.
The directors were considering the merits of issuing equity, including to a cornerstone investor.
Williamson said he did not believe a capital notes rising would have been particularly well received.
He did not see any short term bounce in the price until there was clarification around the structure of equity rising. That was expected to be announced in early March.
"At the moment there's still a fair degree of selling in the market place, around the 60c level."- NZPA
HeatSponge SIDEKICK, Finally Revealed: Boiler Room Equipment, Inc
Fisher Capital on Boiler Room Equipment, Inc, is very proud to finally unveil the SIDEKICK line of condensing boiler economizers for commercial and industrial hot water boilers. The Sidekick has been in development for nearly two years and represents an evolutionary development of high-efficiency installations in the boiler industry. The SIDEKICK is a game changer the likes of which have not been experienced since the introduction of the first condensing boilers. The SIDEKICK offers the ability to integrate condensing boiler efficiencies to conventional boilers on a new or retrofit basis. The SIDEKICK allows a customer with a conventional boiler system the ability to realize condensing efficiency gains that otherwise would require the existing boiler to be demolished and replaced with a new condensing boiler. Conventional, non-condensing boilers can now realize the efficiency benefits of outdoor air temperature reset controls and lower circulating hot water loop temperatures. Sidekicks also allow for duel fuel condensing applications utilizing conventional boilers. The SIDEKICK features all stainless internal construction, stainless tubes and fins, and an insulated outer casing. Inspection and clean out ports make periodic maintenance and cleaning easy.
The efficiency of the SIDEKICK goes far beyond simply energy recovery to the ultra-productive process in which it is selected and designed. Heat recovery for condensing applications introduces a significant number of variables that makes a catalog-approach to equipment selection nearly impossible. Boilerroom Equipment has developed a new method of quantifying heat recovery, the Recovery Rate, and integrated this into the design. The incorporation of the Recovery Rate variable allows a customer to custom tailor the level of heat recovery and cost directly to the requirements of each specific application. We define this new concept in heat recovery design as 3D Modularity, for modular construction in three dimensions. Based on a "Mass-Customization" approach to product development, Bruce will consider all of the application design constraints and will design a SIDEKICK optimized to meet the exact performance requirements at the most competitive price. Bruce has been given the ability to consider all aspects of the heat exchanger design relative to the price of the equipment and generate a fully priced proposal all in real-time; a software and engineering accomplishment that added over one thousand hours of coding and heat transfer modification to Bruce's core program. This means Bruce can handle all inquiries and generate proposals in real time by himself. The near elimination of sales and support overhead and significantly reduced project execution overhead requirements the Bruce software provides allows us to offer a product superior to any before it at pricing and responsiveness levels no conventional competitor could hope to match.
Bruce will go on-line live on Monday December 21st with full public access to the Sidekick software. BEI will display the SIDEKICK in public at the upcoming AHR Exposition in Orlando, booth 3126. We will also have other HeatSponge models on display and based on the popularity in Chicago last year will bring the HeatSponge NASCAR Late Model stock car back for another display appearance.
The efficiency of the SIDEKICK goes far beyond simply energy recovery to the ultra-productive process in which it is selected and designed. Heat recovery for condensing applications introduces a significant number of variables that makes a catalog-approach to equipment selection nearly impossible. Boilerroom Equipment has developed a new method of quantifying heat recovery, the Recovery Rate, and integrated this into the design. The incorporation of the Recovery Rate variable allows a customer to custom tailor the level of heat recovery and cost directly to the requirements of each specific application. We define this new concept in heat recovery design as 3D Modularity, for modular construction in three dimensions. Based on a "Mass-Customization" approach to product development, Bruce will consider all of the application design constraints and will design a SIDEKICK optimized to meet the exact performance requirements at the most competitive price. Bruce has been given the ability to consider all aspects of the heat exchanger design relative to the price of the equipment and generate a fully priced proposal all in real-time; a software and engineering accomplishment that added over one thousand hours of coding and heat transfer modification to Bruce's core program. This means Bruce can handle all inquiries and generate proposals in real time by himself. The near elimination of sales and support overhead and significantly reduced project execution overhead requirements the Bruce software provides allows us to offer a product superior to any before it at pricing and responsiveness levels no conventional competitor could hope to match.
Bruce will go on-line live on Monday December 21st with full public access to the Sidekick software. BEI will display the SIDEKICK in public at the upcoming AHR Exposition in Orlando, booth 3126. We will also have other HeatSponge models on display and based on the popularity in Chicago last year will bring the HeatSponge NASCAR Late Model stock car back for another display appearance.
Fisher Investments Acquires Lighthouse Capital Management Assets
Renowned Investment Management Firm Continues Acquisition Strategy
WOODSIDE, Calif., Aug. 18 /PRNewswire/ -- Fisher Investments, a leading
independent investment management company, today announced the acquisition
of assets from Lighthouse Capital Management L.P. of Houston, TX, which
managed over $460 million as of June 27, 2008. Financial terms were not
disclosed. Lighthouse clients will be served by Fisher Investments' Private
Client Group.
The Lighthouse acquisition is Fisher's second in six months. On
December 31st, Fisher closed a transaction with Econostrat, of Bloomfield
Hills, MI.
"Lighthouse has a rich history of serving clients over the last 20
years, a tradition we will build upon as Lighthouse's clients are entrusted
to our care," said Mark Scalzo, Group Vice President and Head of M&A at
Fisher Investments. "From an M&A perspective, the shortage of other RIA
buyers, created by the scarcity of capital and financial disarray among
some larger financial institutions, leaves Fisher Investments
well-positioned to quickly act on opportunities such as Lighthouse."
Paul Horton, Lighthouse Founder and Principal, said: "Fisher
Investments' performance record, global perspective and dedication to
client service makes this the right decision for our clients."
Luis Gutierrez, Senior Vice President, M&A, of Fisher Investments said:
"This acquisition, coupled with the one completed several months ago,
demonstrates our ability to successfully acquire RIAs. In these
transactions and other on-going conversations, many traditional issues of
concern for RIA owners -- for instance, maintaining a local presence --
have been successfully addressed after learning more about Fisher
Investments' robust client service and portfolio management capabilities."
About Fisher Investments
Fisher Asset Management, LLC, doing business as Fisher Investments,
founded in 1979, is a respected investment management company serving the
needs of investors demanding superior performance, competitive fees and
exceptional service. Fisher Investments' clients include large corporate
and public pension plans, foundations and endowments, as well as more than
20,000 high net worth investors. As of June 30, 2008, the firm managed over
$45 billion in assets under management. The firm is headquartered in
Woodside, California, and registered as an investment adviser with the
Securities and Exchange Commission (SEC). Ken Fisher, founder, CEO and
Chief Investment Officer, is the author of four finance books and many
academic studies, and is a well-respected market forecaster, having written
Forbes magazine's "Portfolio Strategy" financial investment column since
1984. In 2007, in association with John Wiley and Sons, Inc., Fisher
Investments introduced Fisher Investments Press, a publishing imprint
offering advice and education for broad investment audiences.
http://www.fi.com
About Lighthouse Capital Management
Lighthouse Capital Management, L.P. was established in 1988 with the
guiding principles of providing exceptional client service and always
putting the client's interests first. Lighthouse offered investment
management and financial support services to individuals, families, trusts
and institutions with the mission of providing superior performance over
time in the creation and preservation of wealth for clients while being
mindful of their unique, personal needs. Lighthouse is registered as an
investment adviser with the SEC but will soon be withdrawing its
registration. https://www.lighthousecapital.com/
WOODSIDE, Calif., Aug. 18 /PRNewswire/ -- Fisher Investments, a leading
independent investment management company, today announced the acquisition
of assets from Lighthouse Capital Management L.P. of Houston, TX, which
managed over $460 million as of June 27, 2008. Financial terms were not
disclosed. Lighthouse clients will be served by Fisher Investments' Private
Client Group.
The Lighthouse acquisition is Fisher's second in six months. On
December 31st, Fisher closed a transaction with Econostrat, of Bloomfield
Hills, MI.
"Lighthouse has a rich history of serving clients over the last 20
years, a tradition we will build upon as Lighthouse's clients are entrusted
to our care," said Mark Scalzo, Group Vice President and Head of M&A at
Fisher Investments. "From an M&A perspective, the shortage of other RIA
buyers, created by the scarcity of capital and financial disarray among
some larger financial institutions, leaves Fisher Investments
well-positioned to quickly act on opportunities such as Lighthouse."
Paul Horton, Lighthouse Founder and Principal, said: "Fisher
Investments' performance record, global perspective and dedication to
client service makes this the right decision for our clients."
Luis Gutierrez, Senior Vice President, M&A, of Fisher Investments said:
"This acquisition, coupled with the one completed several months ago,
demonstrates our ability to successfully acquire RIAs. In these
transactions and other on-going conversations, many traditional issues of
concern for RIA owners -- for instance, maintaining a local presence --
have been successfully addressed after learning more about Fisher
Investments' robust client service and portfolio management capabilities."
About Fisher Investments
Fisher Asset Management, LLC, doing business as Fisher Investments,
founded in 1979, is a respected investment management company serving the
needs of investors demanding superior performance, competitive fees and
exceptional service. Fisher Investments' clients include large corporate
and public pension plans, foundations and endowments, as well as more than
20,000 high net worth investors. As of June 30, 2008, the firm managed over
$45 billion in assets under management. The firm is headquartered in
Woodside, California, and registered as an investment adviser with the
Securities and Exchange Commission (SEC). Ken Fisher, founder, CEO and
Chief Investment Officer, is the author of four finance books and many
academic studies, and is a well-respected market forecaster, having written
Forbes magazine's "Portfolio Strategy" financial investment column since
1984. In 2007, in association with John Wiley and Sons, Inc., Fisher
Investments introduced Fisher Investments Press, a publishing imprint
offering advice and education for broad investment audiences.
http://www.fi.com
About Lighthouse Capital Management
Lighthouse Capital Management, L.P. was established in 1988 with the
guiding principles of providing exceptional client service and always
putting the client's interests first. Lighthouse offered investment
management and financial support services to individuals, families, trusts
and institutions with the mission of providing superior performance over
time in the creation and preservation of wealth for clients while being
mindful of their unique, personal needs. Lighthouse is registered as an
investment adviser with the SEC but will soon be withdrawing its
registration. https://www.lighthousecapital.com/
Fisher Capital Management: Market Overview First Quarter: India
India is in a sweet spot. The central government budget which set the tone for reducing fiscal deficit and an unexpected increase in the policy rate to rein in inflation has convinced the markets and economists that India is on its way to having a robust economic growth. Industrial output also continued to grow at a fast pace in January as companies produced more cars and cement. In the fiscal year 2011 that ends in March 2011, GDP growth of 8.5% is achievable. Long-term predictions for the southwest monsoons are expected to be normal, giving a boost
to agricultural production and domestic demand.
Inflation in India has been surging, driven by a low base and high food prices as the weakest monsoon rains in 37 years last year hurt farm output. Inflation running at 8.5% may have peaked and it is expected to ease by April as the winter-sown crop comes to market. The year-on-year inflation rate for food articles was 16.22% in the week ending March 13, far above the comfortable zone for the central bank and the government. In order to manage the inflationary expectations, the central bank increased overnight lending and borrowing rates by 0.25 percentages point each, making it one of the first major central banks to raise rates. The central bank further announced that it would continue to roll back its loose monetary policy to manage prices, as the country can’t have sustained strong growth with high inflation.
We expect a 0.25-percentage-point rate hike in mid-April and another increase of one percentage point through March 2011.
Fisher Capital Management Korea News: The rebound in industrial activity also saw a surge in India’s exports for the third month running in January. Exports in January rose 11.5% from a year earlier to $14.34 billion, after having increased 9.3% to $14.61 billion in December. Imports increased 35.5% in January to $24.70 billion while oil imports rose by 56% to $7.05 billion. Non-oil imports, a barometer of investment activity, grew 28.8% to $17.65 billion.
On the back of robust economic numbers and policy pronouncements, the rating agency Standard & Poor’s raised its rating outlook to stable, expecting the fiscal situation to recover and growth to remain strong in the coming years. The government’s commitment to follow the recommendations of the 13th Finance Commission, as well as its move to reduce fertilizer subsidies and raise domestic fuel prices were taken as positive indicators. The country’s external position continues to be in a comfortable zone.
It is unlikely that India will benefit from the Google-China spat as the Indian government will not provide the kind of benefits China extends to the manufacturing sector in China. But some relocation is likely to emerge. For example, American companies GoDaddy and Dell have threatened to pull out of China and relocate themselves in India.
Fisher Capital Management Korea is a leading global financial institution holding extensive relationships with financial institutions, institutional investors and corporations across the world.
As a full service company Fisher Capital Management Korea provides a full range of investment banking services including advanced risk management, corporate strategy and structure, plus raising capital through debt and equity markets. With this as our backbone we continue to provide a client service second to none.
to agricultural production and domestic demand.
Inflation in India has been surging, driven by a low base and high food prices as the weakest monsoon rains in 37 years last year hurt farm output. Inflation running at 8.5% may have peaked and it is expected to ease by April as the winter-sown crop comes to market. The year-on-year inflation rate for food articles was 16.22% in the week ending March 13, far above the comfortable zone for the central bank and the government. In order to manage the inflationary expectations, the central bank increased overnight lending and borrowing rates by 0.25 percentages point each, making it one of the first major central banks to raise rates. The central bank further announced that it would continue to roll back its loose monetary policy to manage prices, as the country can’t have sustained strong growth with high inflation.
We expect a 0.25-percentage-point rate hike in mid-April and another increase of one percentage point through March 2011.
Fisher Capital Management Korea News: The rebound in industrial activity also saw a surge in India’s exports for the third month running in January. Exports in January rose 11.5% from a year earlier to $14.34 billion, after having increased 9.3% to $14.61 billion in December. Imports increased 35.5% in January to $24.70 billion while oil imports rose by 56% to $7.05 billion. Non-oil imports, a barometer of investment activity, grew 28.8% to $17.65 billion.
On the back of robust economic numbers and policy pronouncements, the rating agency Standard & Poor’s raised its rating outlook to stable, expecting the fiscal situation to recover and growth to remain strong in the coming years. The government’s commitment to follow the recommendations of the 13th Finance Commission, as well as its move to reduce fertilizer subsidies and raise domestic fuel prices were taken as positive indicators. The country’s external position continues to be in a comfortable zone.
It is unlikely that India will benefit from the Google-China spat as the Indian government will not provide the kind of benefits China extends to the manufacturing sector in China. But some relocation is likely to emerge. For example, American companies GoDaddy and Dell have threatened to pull out of China and relocate themselves in India.
Fisher Capital Management Korea is a leading global financial institution holding extensive relationships with financial institutions, institutional investors and corporations across the world.
As a full service company Fisher Capital Management Korea provides a full range of investment banking services including advanced risk management, corporate strategy and structure, plus raising capital through debt and equity markets. With this as our backbone we continue to provide a client service second to none.
Malcolm Stamford Joins Eastman Witter as Chief Legal Officer
Eastman Witter announced today that Malcolm Stamford, 53, a partner at Prudential Legal LLP, will join the Firm as Chief Legal Officer.
Malcolm Stamford Joins Eastman Witter as Chief Legal Officer
(WIDEPR - PR NEWS PORTAL) Mr. Stamford will report to Chairman Donald Eastman and be based in New York. He will also join the Firm's Operating and Management Committees.
Mr. Eastman commented, "Malcolm Stamford has been a well respected advisor to boards and senior managements on critical issues, particularly in financial services, for over 30 years. We look forward to benefiting from Malcolm’s advice and wisdom, and we are very pleased he is joining our senior management team.
Mr. Stamford, incoming Chief Legal Officer, said, "I am very excited to be joining a firm with the history and stature of Eastman Witter, and to become part of the experienced and talented senior management team that Donald Eastman has assembled. I look forward to helping the firm navigate the challenges facing the financial services industry today."
As previously announced, Mr. Henry Witter, the firm's former Chief Legal Officer, will remain based in New York as C.E.O. and will continue to focus on the firm’s management and his responsibilities as a board member of Eastman Witter's European subsidiary and continue to interface with their major global regulators and key international clients.
Eastman Witter is a client-friendly commodity futures firm that puts the needs of the client ahead of its own. We are dedicated to providing the best service available in the industry today and to provide its clients with the tools that can assist them in becoming more successful in their commodity trading.
Malcolm Stamford Joins Eastman Witter as Chief Legal Officer
(WIDEPR - PR NEWS PORTAL) Mr. Stamford will report to Chairman Donald Eastman and be based in New York. He will also join the Firm's Operating and Management Committees.
Mr. Eastman commented, "Malcolm Stamford has been a well respected advisor to boards and senior managements on critical issues, particularly in financial services, for over 30 years. We look forward to benefiting from Malcolm’s advice and wisdom, and we are very pleased he is joining our senior management team.
Mr. Stamford, incoming Chief Legal Officer, said, "I am very excited to be joining a firm with the history and stature of Eastman Witter, and to become part of the experienced and talented senior management team that Donald Eastman has assembled. I look forward to helping the firm navigate the challenges facing the financial services industry today."
As previously announced, Mr. Henry Witter, the firm's former Chief Legal Officer, will remain based in New York as C.E.O. and will continue to focus on the firm’s management and his responsibilities as a board member of Eastman Witter's European subsidiary and continue to interface with their major global regulators and key international clients.
Eastman Witter is a client-friendly commodity futures firm that puts the needs of the client ahead of its own. We are dedicated to providing the best service available in the industry today and to provide its clients with the tools that can assist them in becoming more successful in their commodity trading.
Fisher Capital Equipment Management - Significant Progress on Dulles Metrorail
Avoid internet scams, get the latest news update from Fisher Capital Equipment Management. Construction of the Dulles Corridor Metrorail Extension project, which is being built near Washington, D.C., is moving forward above and below ground. Crews have made significant progress on the elevated guideway structure that will carry the Metrorail over I-495, the region's primary highway, as well as Tysons Corner, one of the area's most congested business and retail districts. At the same time, a 2400-foot tunnel is being built under the intersection of Route 123 and International Drive as the traffic continues through Tysons Corner, and as the businesses and residents are going about their daily routines.
The progress of the project was highlighted on W-USA 9, a Washington, D.C. area TV station. The report featured interviews with Bechtel construction managers. Watch the video.
Construction of the project began in March 2009, with the signing of a $900 million grant from the U.S. Department of Transportation. The project is being constructed by Dulles Transit Partners, a team of Bechtel and URS, and will include five new Metro stations and 11.5 miles of new track. The project is owned and managed by the Metropolitan Washington Airports Authority.
Fisher Capital Equipment Management - Significant Progress on Dulles Metrorail - Bechtel (BEK tl) is the world's No. 1 choice for engineering, construction, and project management.
Our diverse portfolio encompasses energy, transportation, communications, mining, oil and gas, and government services. We currently have projects in dozens of locations worldwide, from Alaska to Australia. No matter how challenging a project or how remote its location, chances are Bechtel can handle it. That's because we bring an unmatched combination of knowledge, skill, experience, and customer commitment to every job.
We have had record revenues for the past five years, and Engineering News-Record (ENR) has named Bechtel the top U.S. construction contractor for 12 straight years.
While we work for governments and commercial customers, our projects have helped grow local economies and improve the quality of life for communities and people around the world. Time and again our work has demonstrated that the only limits on human achievement are those that we place on ourselves.
Privately owned with headquarters in San Francisco, we have offices around the world and 49,000 employees. In 2009, we had revenues of $30.8 billion and booked new work valued at $20.3 billion.
What We Do
Airports and seaports; Communications networks; Defense and aerospace facilities; Environmental cleanup projects; Fossil and nuclear power plants; Mines and smelters; Oil and gas field development; Pipelines; Roads and rail systems; Refineries and petrochemical facilities
Ethics
Bechtel's culture is grounded in integrity and respect. This means adhering to the highest standards of ethics. Our reputation as an ethical company is one of our most valuable assets. We stand by everything we do.
Quality
At Bechtel, quality means doing the job right the first time. We've always delivered quality work, and we are continually striving to improve our performance through Six Sigma and other initiatives.
Safety
Bechtel has a world-class safety program, and it pays off. Nearly 90 percent of our projects complete each year without a lost-time accident. Our philosophy is simple—every accident, and therefore every injury, is preventable.
The progress of the project was highlighted on W-USA 9, a Washington, D.C. area TV station. The report featured interviews with Bechtel construction managers. Watch the video.
Construction of the project began in March 2009, with the signing of a $900 million grant from the U.S. Department of Transportation. The project is being constructed by Dulles Transit Partners, a team of Bechtel and URS, and will include five new Metro stations and 11.5 miles of new track. The project is owned and managed by the Metropolitan Washington Airports Authority.
Fisher Capital Equipment Management - Significant Progress on Dulles Metrorail - Bechtel (BEK tl) is the world's No. 1 choice for engineering, construction, and project management.
Our diverse portfolio encompasses energy, transportation, communications, mining, oil and gas, and government services. We currently have projects in dozens of locations worldwide, from Alaska to Australia. No matter how challenging a project or how remote its location, chances are Bechtel can handle it. That's because we bring an unmatched combination of knowledge, skill, experience, and customer commitment to every job.
We have had record revenues for the past five years, and Engineering News-Record (ENR) has named Bechtel the top U.S. construction contractor for 12 straight years.
While we work for governments and commercial customers, our projects have helped grow local economies and improve the quality of life for communities and people around the world. Time and again our work has demonstrated that the only limits on human achievement are those that we place on ourselves.
Privately owned with headquarters in San Francisco, we have offices around the world and 49,000 employees. In 2009, we had revenues of $30.8 billion and booked new work valued at $20.3 billion.
What We Do
Airports and seaports; Communications networks; Defense and aerospace facilities; Environmental cleanup projects; Fossil and nuclear power plants; Mines and smelters; Oil and gas field development; Pipelines; Roads and rail systems; Refineries and petrochemical facilities
Ethics
Bechtel's culture is grounded in integrity and respect. This means adhering to the highest standards of ethics. Our reputation as an ethical company is one of our most valuable assets. We stand by everything we do.
Quality
At Bechtel, quality means doing the job right the first time. We've always delivered quality work, and we are continually striving to improve our performance through Six Sigma and other initiatives.
Safety
Bechtel has a world-class safety program, and it pays off. Nearly 90 percent of our projects complete each year without a lost-time accident. Our philosophy is simple—every accident, and therefore every injury, is preventable.
Fisher Capital Management South Korea, Brazil’s Economy: 1st Quarter
Fisher Capital Management Seoul Korea, Brazil’s Economy - The brief recession of 2009 has given way to a robust increase in consumer
(WIDEPR - PR NEWS PORTAL) Fisher Capital Management Seoul Korea, Brazil’s Economy - The brief recession of 2009 has given way to a robust increase in consumer demand and recovery in investment in Brazil in 2010. The economy is likely to grow 5.5% this year. GDP grew 2% year-on-year in the fourth quarter of 2009 and fell 0.2% for the whole of 2009 compared with 2008.
Fisher Capital Management South Korea Investing: - The central bank did not raise its target overnight interest rate, the so-called Selic rate, unchanged leaving it at 8.75% a year. This was expected as the presidential election is nearing. The rate fell from 13.75% to 8.75% between December 2008 and July 2009. By the year-end, the rate is expected to rise by 250 basis points to curb inflation.
Even though the US and Brazil are not as open an economy as one would believe. Trade accounts for approximately 14% for both the countries. US cotton subsidies had been a bone of contention for the two countries. The US was accused of excessive cotton subsidies by Brazil. After eight years of litigation at the World Trade Organization Brazil has won the case and Brazil’s move to raise tariffs on a wide range of American goods has a potential of starting a new front in the trade war with the US over cotton subsidies. Overall, the issue is still not blown out of proportion as the two countries are engaged on other fronts.
Fisher Capital Management Korea, Brazil’s Economy: 1st Quarter Investment - Brazil’s government announced a R$958.9bn programme of investments in infrastructure for 2011 to 2014. The program is known as the PAC 2 … the Portuguese acronym for accelerated growth programme, part two … to increase Brazil’s investment rate and its potential for economic growth during the period of the next government, which begins on January 1 2011.
Fisher Capital Management South Korea, Investment News: Henrique Meirelles who provided monetary stability to Brazil is all set to stand for election either as a Vice President or a senator. President Lula may choose him to run for the Vice President office to send a message that macroeconomic stability will be maintained under Ms Rousseff, presidential nominee of Mr. Lula’s party in the October election.
Fisher Capital is a leading global financial institution holding extensive relationships with financial institutions, institutional investors and corporations across the world.
As a full service company Fisher Capital provides a full range of investment banking services including advanced risk management, corporate strategy and structure, plus raising capital through debt and equity markets. With this as our backbone we continue to provide a client service second to none.
Let us keep you informed of all the latest news and developments with our free monthly newsletter of analysis and recommendations.
Join our mailing list to recieved our free monthly Fisher Capital newsletter, with analysis of the latest financial and investment news and developmetns, plus of course our current research findings and recommendations.
Tags: Fisher Capital management Fisher Capital FisherCapital management korea FisherCapital management investment FisherCapital management equities
(WIDEPR - PR NEWS PORTAL) Fisher Capital Management Seoul Korea, Brazil’s Economy - The brief recession of 2009 has given way to a robust increase in consumer demand and recovery in investment in Brazil in 2010. The economy is likely to grow 5.5% this year. GDP grew 2% year-on-year in the fourth quarter of 2009 and fell 0.2% for the whole of 2009 compared with 2008.
Fisher Capital Management South Korea Investing: - The central bank did not raise its target overnight interest rate, the so-called Selic rate, unchanged leaving it at 8.75% a year. This was expected as the presidential election is nearing. The rate fell from 13.75% to 8.75% between December 2008 and July 2009. By the year-end, the rate is expected to rise by 250 basis points to curb inflation.
Even though the US and Brazil are not as open an economy as one would believe. Trade accounts for approximately 14% for both the countries. US cotton subsidies had been a bone of contention for the two countries. The US was accused of excessive cotton subsidies by Brazil. After eight years of litigation at the World Trade Organization Brazil has won the case and Brazil’s move to raise tariffs on a wide range of American goods has a potential of starting a new front in the trade war with the US over cotton subsidies. Overall, the issue is still not blown out of proportion as the two countries are engaged on other fronts.
Fisher Capital Management Korea, Brazil’s Economy: 1st Quarter Investment - Brazil’s government announced a R$958.9bn programme of investments in infrastructure for 2011 to 2014. The program is known as the PAC 2 … the Portuguese acronym for accelerated growth programme, part two … to increase Brazil’s investment rate and its potential for economic growth during the period of the next government, which begins on January 1 2011.
Fisher Capital Management South Korea, Investment News: Henrique Meirelles who provided monetary stability to Brazil is all set to stand for election either as a Vice President or a senator. President Lula may choose him to run for the Vice President office to send a message that macroeconomic stability will be maintained under Ms Rousseff, presidential nominee of Mr. Lula’s party in the October election.
Fisher Capital is a leading global financial institution holding extensive relationships with financial institutions, institutional investors and corporations across the world.
As a full service company Fisher Capital provides a full range of investment banking services including advanced risk management, corporate strategy and structure, plus raising capital through debt and equity markets. With this as our backbone we continue to provide a client service second to none.
Let us keep you informed of all the latest news and developments with our free monthly newsletter of analysis and recommendations.
Join our mailing list to recieved our free monthly Fisher Capital newsletter, with analysis of the latest financial and investment news and developmetns, plus of course our current research findings and recommendations.
Tags: Fisher Capital management Fisher Capital FisherCapital management korea FisherCapital management investment FisherCapital management equities
Fisher Capital Updates - Bechtel-Enka Completes Albanian Motorway
Bechtel and joint-venture partner Enka today completed construction on the Albanian Motorway, a 37-mile (61-km).
(WIDEPR - PR NEWS PORTAL) Fisher Capital Equipment Management News Updates - TIRANA, ALBANIA - Bechtel and joint-venture partner Enka today completed construction on the Albanian Motorway, a 37-mile (61-km), four-lane highway that stretches from central Albania to the to Kosovo border. The motorway is now open to traffic.
Construction Project Management and Civil Engineering Careers scams. Keep posted and don’t be a victim.
The end of construction was marked by a ceremony to open a second tunnel bore, the final section of the motorway. Ministers of transport from Albania and Kosovo, and additional senior officials from both countries, attended the opening. Speaking on behalf of the Albanian government, Sokol Olldashi, the minister of transport and telecommunications, thanked Bechtel-Enka for its commitment and the quality of work performed during construction of the motorway.
The motorway is the central leg of a 106-mile (171-km) highway traversing the country from the Adriatic Sea to the northeastern village of Kalimash near Kosovo. The new roadway cuts travel time along the route from six to two hours, boosting coastal trade and northeast tourism. The motorway also provides a vital connection within Albania and across the region, linking markets to the Adriatic port of Durres and contributing to economic growth as Albania prepares for accession to the European Union.
The Albanian Motorway is one of the largest-ever infrastructure projects in the country and presented many engineering challenges due to complexities of the geology in the region and the fast-track construction schedule. The motorway includes a 3.4-mile (5.5-km) twin bore tunnel and 29 bridges built in a rocky, mountainous region.
During construction, the project was the largest employer in the area, with Albanians accounting for two thirds of the workforce.
Fisher Capital Equipment Management News Updates - Bechtel (BEK tl) is the world's No. 1 choice for engineering, construction, and project management. Construction Project Management and Civil Engineering Careers scams. Keep posted and don’t be a victim.
Our diverse portfolio encompasses energy, transportation, communications, mining, oil and gas, and government services. We currently have projects in dozens of locations worldwide, from Alaska to Australia. No matter how challenging a project or how remote its location, chances are Bechtel can handle it. That's because we bring an unmatched combination of knowledge, skill, experience, and customer commitment to every job.
We have had record revenues for the past five years, and Engineering News-Record (ENR) has named Bechtel the top U.S. construction contractor for 12 straight years.
While we work for governments and commercial customers, our projects have helped grow local economies and improve the quality of life for communities and people around the world. Time and again our work has demonstrated that the only limits on human achievement are those that we place on ourselves.
Privately owned with headquarters in San Francisco, we have offices around the world and 49,000 employees. In 2009, we had revenues of $30.8 billion and booked new work valued at $20.3 billion.
Ethics
Bechtel's culture is grounded in integrity and respect. This means adhering to the highest standards of ethics. Our reputation as an ethical company is one of our most valuable assets. We stand by everything we do.
Quality
At Bechtel, quality means doing the job right the first time. We've always delivered quality work, and we are continually striving to improve our performance through Six Sigma and other initiatives.
Safety
Bechtel has a world-class safety program, and it pays off. Nearly 90 percent of our projects complete each year without a lost-time accident. Our philosophy is simple—every accident, and therefore every injury, is preventable.
(WIDEPR - PR NEWS PORTAL) Fisher Capital Equipment Management News Updates - TIRANA, ALBANIA - Bechtel and joint-venture partner Enka today completed construction on the Albanian Motorway, a 37-mile (61-km), four-lane highway that stretches from central Albania to the to Kosovo border. The motorway is now open to traffic.
Construction Project Management and Civil Engineering Careers scams. Keep posted and don’t be a victim.
The end of construction was marked by a ceremony to open a second tunnel bore, the final section of the motorway. Ministers of transport from Albania and Kosovo, and additional senior officials from both countries, attended the opening. Speaking on behalf of the Albanian government, Sokol Olldashi, the minister of transport and telecommunications, thanked Bechtel-Enka for its commitment and the quality of work performed during construction of the motorway.
The motorway is the central leg of a 106-mile (171-km) highway traversing the country from the Adriatic Sea to the northeastern village of Kalimash near Kosovo. The new roadway cuts travel time along the route from six to two hours, boosting coastal trade and northeast tourism. The motorway also provides a vital connection within Albania and across the region, linking markets to the Adriatic port of Durres and contributing to economic growth as Albania prepares for accession to the European Union.
The Albanian Motorway is one of the largest-ever infrastructure projects in the country and presented many engineering challenges due to complexities of the geology in the region and the fast-track construction schedule. The motorway includes a 3.4-mile (5.5-km) twin bore tunnel and 29 bridges built in a rocky, mountainous region.
During construction, the project was the largest employer in the area, with Albanians accounting for two thirds of the workforce.
Fisher Capital Equipment Management News Updates - Bechtel (BEK tl) is the world's No. 1 choice for engineering, construction, and project management. Construction Project Management and Civil Engineering Careers scams. Keep posted and don’t be a victim.
Our diverse portfolio encompasses energy, transportation, communications, mining, oil and gas, and government services. We currently have projects in dozens of locations worldwide, from Alaska to Australia. No matter how challenging a project or how remote its location, chances are Bechtel can handle it. That's because we bring an unmatched combination of knowledge, skill, experience, and customer commitment to every job.
We have had record revenues for the past five years, and Engineering News-Record (ENR) has named Bechtel the top U.S. construction contractor for 12 straight years.
While we work for governments and commercial customers, our projects have helped grow local economies and improve the quality of life for communities and people around the world. Time and again our work has demonstrated that the only limits on human achievement are those that we place on ourselves.
Privately owned with headquarters in San Francisco, we have offices around the world and 49,000 employees. In 2009, we had revenues of $30.8 billion and booked new work valued at $20.3 billion.
Ethics
Bechtel's culture is grounded in integrity and respect. This means adhering to the highest standards of ethics. Our reputation as an ethical company is one of our most valuable assets. We stand by everything we do.
Quality
At Bechtel, quality means doing the job right the first time. We've always delivered quality work, and we are continually striving to improve our performance through Six Sigma and other initiatives.
Safety
Bechtel has a world-class safety program, and it pays off. Nearly 90 percent of our projects complete each year without a lost-time accident. Our philosophy is simple—every accident, and therefore every injury, is preventable.
Government Bond Markets Global Outlook Fisher Capital Management Seoul
Government Bond Markets Global Outlook Fisher Capital Management Seoul - Conditions in the government bond markets
(WIDEPR - PR NEWS PORTAL) Government Bond Markets Global Outlook Fisher Capital Management Seoul - Conditions in the government bond markets have remained very difficult over the past month, and there have been further falls in some of the minor markets, especially in the euro-zone, because of continuing fears about sovereign debt defaults. The agreement reached by the member countries of the euro-zone to combine with the IMF to provide any necessary support to enable Greece to refinance its maturing debts and avoid a default has had a poor response in the markets; but at least Greece has been able to make further bond issues; and the gilt edged market has coped fairly well so far with a disappointing Budget statement that has left any real attempt to resolve the serious UK debt problems until after the general election. But the sudden weakness in the world bond markets after a series of disappointing auctions has once again increased the tensions.
Our position remains unchanged; any existing exposure to bonds should be further reduced in favor of US & Euro equities.
Fisher Capital Management Seoul, South Korea - The global economic recovery is developing slowly, and so short-term interest rates are likely to remain at low levels for a considerable period. It is also possible that the “fudged” agreement amongst member countries of the euro-zone will provide an opportunity for the introduction of the necessary austerity measures; and that a new government will finally begin to address the debt problems in the UK. But the risks in the situation are still increasing, sovereign debt defaults may still occur, and the single currency system in the euro-zone may not be sustainable in its present form. Higher bond yields therefore appear unavoidable; prospects for all the bond markets are unattractive.
Developments in the bond market over the past month have clearly illustrated the need for caution. The US economy continues to recover. The Fed has left shortterm interest rates unchanged, and has indicated that they will remain “at exceptionally low levels for an extended period”. This tended to enhance the “safe haven” status of the US equity market for most of the past month, as conditions continued to deteriorate in other bond markets.
Fisher Capital Management Seoul, South Korea - Most of the available evidence supports the view that the economic recovery is continuing, but only at a slow pace. The unemployment rate remains close to 10%, and the housing sector is still depressed, with both new housing starts and sales of existing homes weakened still further by adverse weather conditions. However
retail sales are holding up fairly well, and manufacturers are beginning to increase capital expenditures and inventories, and so there is a general expectation that growth in the first quarter will be around a 2% annualized rate.
Fisher Capital Management Seoul, South Korea - The Fed has confirmed that its buying programmed for mortgage-backed securities has ended, and that it may be moving slowly towards re-selling some of these securities; but it seems to be in no hurry, and so both the economic background, and the position of the central bank, remain broadly supportive.
The situation facing investors in the mainland European bond markets is more serious. The economic background is improving, with the weaker euro providing considerable support in export markets, and so the area continues to move out of recession. But progress is slow, and so the European Central Bank is maintaining very low short-term interest rates, and providing support. However the massive fiscal deficits are threatening to overwhelm the bond markets and to lead to sovereign debt defaults, and so investors have continued to switch from the bonds of the weaker countries into those of the stronger countries, and have widened the yield
spreads across the markets. The latest Greek bond auctions have received only a very moderate response, and there is considerable uncertainty whether even the markets of the stronger countries are adequately discounting the risks in the situation.
Fisher Capital Management Seoul, South Korea - The available evidence on the performance of the euro-zone economy is mixed, but slightly more encouraging. The weakness in domestic demand is continuing, and retail sales volumes are disappointing in most member countries; but the manufacturing sector, especially in Germany, is much more buoyant, with exports
providing most of the momentum. The latest Ifo index of business sentiment in Germany is sharply higher, and other countries are also sharing in the improvement.
Analysts are therefore forecasting growth around the 0.5% level in the first quarter
of the year.
(WIDEPR - PR NEWS PORTAL) Government Bond Markets Global Outlook Fisher Capital Management Seoul - Conditions in the government bond markets have remained very difficult over the past month, and there have been further falls in some of the minor markets, especially in the euro-zone, because of continuing fears about sovereign debt defaults. The agreement reached by the member countries of the euro-zone to combine with the IMF to provide any necessary support to enable Greece to refinance its maturing debts and avoid a default has had a poor response in the markets; but at least Greece has been able to make further bond issues; and the gilt edged market has coped fairly well so far with a disappointing Budget statement that has left any real attempt to resolve the serious UK debt problems until after the general election. But the sudden weakness in the world bond markets after a series of disappointing auctions has once again increased the tensions.
Our position remains unchanged; any existing exposure to bonds should be further reduced in favor of US & Euro equities.
Fisher Capital Management Seoul, South Korea - The global economic recovery is developing slowly, and so short-term interest rates are likely to remain at low levels for a considerable period. It is also possible that the “fudged” agreement amongst member countries of the euro-zone will provide an opportunity for the introduction of the necessary austerity measures; and that a new government will finally begin to address the debt problems in the UK. But the risks in the situation are still increasing, sovereign debt defaults may still occur, and the single currency system in the euro-zone may not be sustainable in its present form. Higher bond yields therefore appear unavoidable; prospects for all the bond markets are unattractive.
Developments in the bond market over the past month have clearly illustrated the need for caution. The US economy continues to recover. The Fed has left shortterm interest rates unchanged, and has indicated that they will remain “at exceptionally low levels for an extended period”. This tended to enhance the “safe haven” status of the US equity market for most of the past month, as conditions continued to deteriorate in other bond markets.
Fisher Capital Management Seoul, South Korea - Most of the available evidence supports the view that the economic recovery is continuing, but only at a slow pace. The unemployment rate remains close to 10%, and the housing sector is still depressed, with both new housing starts and sales of existing homes weakened still further by adverse weather conditions. However
retail sales are holding up fairly well, and manufacturers are beginning to increase capital expenditures and inventories, and so there is a general expectation that growth in the first quarter will be around a 2% annualized rate.
Fisher Capital Management Seoul, South Korea - The Fed has confirmed that its buying programmed for mortgage-backed securities has ended, and that it may be moving slowly towards re-selling some of these securities; but it seems to be in no hurry, and so both the economic background, and the position of the central bank, remain broadly supportive.
The situation facing investors in the mainland European bond markets is more serious. The economic background is improving, with the weaker euro providing considerable support in export markets, and so the area continues to move out of recession. But progress is slow, and so the European Central Bank is maintaining very low short-term interest rates, and providing support. However the massive fiscal deficits are threatening to overwhelm the bond markets and to lead to sovereign debt defaults, and so investors have continued to switch from the bonds of the weaker countries into those of the stronger countries, and have widened the yield
spreads across the markets. The latest Greek bond auctions have received only a very moderate response, and there is considerable uncertainty whether even the markets of the stronger countries are adequately discounting the risks in the situation.
Fisher Capital Management Seoul, South Korea - The available evidence on the performance of the euro-zone economy is mixed, but slightly more encouraging. The weakness in domestic demand is continuing, and retail sales volumes are disappointing in most member countries; but the manufacturing sector, especially in Germany, is much more buoyant, with exports
providing most of the momentum. The latest Ifo index of business sentiment in Germany is sharply higher, and other countries are also sharing in the improvement.
Analysts are therefore forecasting growth around the 0.5% level in the first quarter
of the year.
Fisher Capital Equipment Update - Market slams Fisher and Paykel on profit Warning
The share market has come down hard on Fisher & Paykel Appliances - with its shares falling 40 per cent after the company issued a profit warning today.
(WIDEPR - PR NEWS PORTAL) The share market has come down hard on Fisher & Paykel Appliances - with its shares falling 40 per cent after the company issued a profit warning today.
The whiteware manufacturer's shares, which were worth $2.94 this time last year and worth $1 on Friday, went into free fall and are currently trading at just 60 cents, a 40 cent fall.
Earlier today the company said it expected a net profit of $25 million to $30m, down up to 54 per cent on last year.
Due to the deterioration in the New Zealand dollar, Fisher & Paykel Appliances' total bank debt grew $122 from March last year to $512m at the end of January. It was predicted to be $570m by the end of March.
It is now looking at reviewing its capital structure and alternative sources of capital.
Fisher Capital Equipment Update - Market slams Fisher and Paykel on profit Warning - The market was very concerned the company had to come back with a capital raising, which was unexpected, said Hamilton, Hindin, and Greene director Grant Williamson.
The home appliance market had dropped off in all areas Fisher & Paykel exported to and there did not appear to be too many signs of a turnaround in world housing at the moment, he said.
"I think investors are starting to say; how long is it going to be before conditions change for the company? I think that's the biggest concern."
Williamson said Fisher & Paykel Appliances' wares were sold into most new homes but when very few new homes being built it would have a serious effect on their sales.
A 40 per cent drop in share value was a big hit for the share price to take but that was the general state of the market.
"If any company disappoints the market then the market is very harsh on their share price and we have certainly seen that this morning with Fisher & Paykel Appliances."
The company announced it would not proceed with a capital note issue and was looking an alternative source of capital.
The directors were considering the merits of issuing equity, including to a cornerstone investor.
Williamson said he did not believe a capital notes rising would have been particularly well received.
He did not see any short term bounce in the price until there was clarification around the structure of equity rising. That was expected to be announced in early March.
"At the moment there's still a fair degree of selling in the market place, around the 60c level."- NZPA
(WIDEPR - PR NEWS PORTAL) The share market has come down hard on Fisher & Paykel Appliances - with its shares falling 40 per cent after the company issued a profit warning today.
The whiteware manufacturer's shares, which were worth $2.94 this time last year and worth $1 on Friday, went into free fall and are currently trading at just 60 cents, a 40 cent fall.
Earlier today the company said it expected a net profit of $25 million to $30m, down up to 54 per cent on last year.
Due to the deterioration in the New Zealand dollar, Fisher & Paykel Appliances' total bank debt grew $122 from March last year to $512m at the end of January. It was predicted to be $570m by the end of March.
It is now looking at reviewing its capital structure and alternative sources of capital.
Fisher Capital Equipment Update - Market slams Fisher and Paykel on profit Warning - The market was very concerned the company had to come back with a capital raising, which was unexpected, said Hamilton, Hindin, and Greene director Grant Williamson.
The home appliance market had dropped off in all areas Fisher & Paykel exported to and there did not appear to be too many signs of a turnaround in world housing at the moment, he said.
"I think investors are starting to say; how long is it going to be before conditions change for the company? I think that's the biggest concern."
Williamson said Fisher & Paykel Appliances' wares were sold into most new homes but when very few new homes being built it would have a serious effect on their sales.
A 40 per cent drop in share value was a big hit for the share price to take but that was the general state of the market.
"If any company disappoints the market then the market is very harsh on their share price and we have certainly seen that this morning with Fisher & Paykel Appliances."
The company announced it would not proceed with a capital note issue and was looking an alternative source of capital.
The directors were considering the merits of issuing equity, including to a cornerstone investor.
Williamson said he did not believe a capital notes rising would have been particularly well received.
He did not see any short term bounce in the price until there was clarification around the structure of equity rising. That was expected to be announced in early March.
"At the moment there's still a fair degree of selling in the market place, around the 60c level."- NZPA
Government Bond Markets Global Outlook Fisher Capital Management Seoul
Government Bond Markets Global Outlook Fisher Capital Management Seoul - Conditions in the government bond markets
(WIDEPR - PR NEWS PORTAL) Government Bond Markets Global Outlook Fisher Capital Management Seoul - Conditions in the government bond markets have remained very difficult over the past month, and there have been further falls in some of the minor markets, especially in the euro-zone, because of continuing fears about sovereign debt defaults. The agreement reached by the member countries of the euro-zone to combine with the IMF to provide any necessary support to enable Greece to refinance its maturing debts and avoid a default has had a poor response in the markets; but at least Greece has been able to make further bond issues; and the gilt edged market has coped fairly well so far with a disappointing Budget statement that has left any real attempt to resolve the serious UK debt problems until after the general election. But the sudden weakness in the world bond markets after a series of disappointing auctions has once again increased the tensions.
Our position remains unchanged; any existing exposure to bonds should be further reduced in favor of US & Euro equities.
Fisher Capital Management Seoul, South Korea - The global economic recovery is developing slowly, and so short-term interest rates are likely to remain at low levels for a considerable period. It is also possible that the “fudged” agreement amongst member countries of the euro-zone will provide an opportunity for the introduction of the necessary austerity measures; and that a new government will finally begin to address the debt problems in the UK. But the risks in the situation are still increasing, sovereign debt defaults may still occur, and the single currency system in the euro-zone may not be sustainable in its present form. Higher bond yields therefore appear unavoidable; prospects for all the bond markets are unattractive.
Developments in the bond market over the past month have clearly illustrated the need for caution. The US economy continues to recover. The Fed has left shortterm interest rates unchanged, and has indicated that they will remain “at exceptionally low levels for an extended period”. This tended to enhance the “safe haven” status of the US equity market for most of the past month, as conditions continued to deteriorate in other bond markets.
Fisher Capital Management Seoul, South Korea - Most of the available evidence supports the view that the economic recovery is continuing, but only at a slow pace. The unemployment rate remains close to 10%, and the housing sector is still depressed, with both new housing starts and sales of existing homes weakened still further by adverse weather conditions. However
retail sales are holding up fairly well, and manufacturers are beginning to increase capital expenditures and inventories, and so there is a general expectation that growth in the first quarter will be around a 2% annualized rate.
Fisher Capital Management Seoul, South Korea - The Fed has confirmed that its buying programmed for mortgage-backed securities has ended, and that it may be moving slowly towards re-selling some of these securities; but it seems to be in no hurry, and so both the economic background, and the position of the central bank, remain broadly supportive.
The situation facing investors in the mainland European bond markets is more serious. The economic background is improving, with the weaker euro providing considerable support in export markets, and so the area continues to move out of recession. But progress is slow, and so the European Central Bank is maintaining very low short-term interest rates, and providing support. However the massive fiscal deficits are threatening to overwhelm the bond markets and to lead to sovereign debt defaults, and so investors have continued to switch from the bonds of the weaker countries into those of the stronger countries, and have widened the yield
spreads across the markets. The latest Greek bond auctions have received only a very moderate response, and there is considerable uncertainty whether even the markets of the stronger countries are adequately discounting the risks in the situation.
Fisher Capital Management Seoul, South Korea - The available evidence on the performance of the euro-zone economy is mixed, but slightly more encouraging. The weakness in domestic demand is continuing, and retail sales volumes are disappointing in most member countries; but the manufacturing sector, especially in Germany, is much more buoyant, with exports
providing most of the momentum. The latest Ifo index of business sentiment in Germany is sharply higher, and other countries are also sharing in the improvement.
Analysts are therefore forecasting growth around the 0.5% level in the first quarter
of the year.
(WIDEPR - PR NEWS PORTAL) Government Bond Markets Global Outlook Fisher Capital Management Seoul - Conditions in the government bond markets have remained very difficult over the past month, and there have been further falls in some of the minor markets, especially in the euro-zone, because of continuing fears about sovereign debt defaults. The agreement reached by the member countries of the euro-zone to combine with the IMF to provide any necessary support to enable Greece to refinance its maturing debts and avoid a default has had a poor response in the markets; but at least Greece has been able to make further bond issues; and the gilt edged market has coped fairly well so far with a disappointing Budget statement that has left any real attempt to resolve the serious UK debt problems until after the general election. But the sudden weakness in the world bond markets after a series of disappointing auctions has once again increased the tensions.
Our position remains unchanged; any existing exposure to bonds should be further reduced in favor of US & Euro equities.
Fisher Capital Management Seoul, South Korea - The global economic recovery is developing slowly, and so short-term interest rates are likely to remain at low levels for a considerable period. It is also possible that the “fudged” agreement amongst member countries of the euro-zone will provide an opportunity for the introduction of the necessary austerity measures; and that a new government will finally begin to address the debt problems in the UK. But the risks in the situation are still increasing, sovereign debt defaults may still occur, and the single currency system in the euro-zone may not be sustainable in its present form. Higher bond yields therefore appear unavoidable; prospects for all the bond markets are unattractive.
Developments in the bond market over the past month have clearly illustrated the need for caution. The US economy continues to recover. The Fed has left shortterm interest rates unchanged, and has indicated that they will remain “at exceptionally low levels for an extended period”. This tended to enhance the “safe haven” status of the US equity market for most of the past month, as conditions continued to deteriorate in other bond markets.
Fisher Capital Management Seoul, South Korea - Most of the available evidence supports the view that the economic recovery is continuing, but only at a slow pace. The unemployment rate remains close to 10%, and the housing sector is still depressed, with both new housing starts and sales of existing homes weakened still further by adverse weather conditions. However
retail sales are holding up fairly well, and manufacturers are beginning to increase capital expenditures and inventories, and so there is a general expectation that growth in the first quarter will be around a 2% annualized rate.
Fisher Capital Management Seoul, South Korea - The Fed has confirmed that its buying programmed for mortgage-backed securities has ended, and that it may be moving slowly towards re-selling some of these securities; but it seems to be in no hurry, and so both the economic background, and the position of the central bank, remain broadly supportive.
The situation facing investors in the mainland European bond markets is more serious. The economic background is improving, with the weaker euro providing considerable support in export markets, and so the area continues to move out of recession. But progress is slow, and so the European Central Bank is maintaining very low short-term interest rates, and providing support. However the massive fiscal deficits are threatening to overwhelm the bond markets and to lead to sovereign debt defaults, and so investors have continued to switch from the bonds of the weaker countries into those of the stronger countries, and have widened the yield
spreads across the markets. The latest Greek bond auctions have received only a very moderate response, and there is considerable uncertainty whether even the markets of the stronger countries are adequately discounting the risks in the situation.
Fisher Capital Management Seoul, South Korea - The available evidence on the performance of the euro-zone economy is mixed, but slightly more encouraging. The weakness in domestic demand is continuing, and retail sales volumes are disappointing in most member countries; but the manufacturing sector, especially in Germany, is much more buoyant, with exports
providing most of the momentum. The latest Ifo index of business sentiment in Germany is sharply higher, and other countries are also sharing in the improvement.
Analysts are therefore forecasting growth around the 0.5% level in the first quarter
of the year.
Fisher Capital Equipment Update - Machine Components Industry in China Problems
Fisher Capital Equipment Management Update- Machine Components Industry in China Problems and their causes.
(WIDEPR - PR NEWS PORTAL) Fisher Capital Equipment Management Update- Machine Components Industry in China Problems and their causes - the machinery, basic parts - construction machinery industry Avoid online internet scams, get latest updates on Fisher Capital Equipment Management website. As our country on the basis of pieces of machinery in Machinery Industry Awareness of the importance of late, long-term lack of investment, leading the entire industry based on poor, weak economic foundation and strength of the weak. In particular, as the host country rises the level of basic pieces of machinery behind the main bottleneck is becoming more apparent. In recent years, although the introduction of technology, technological innovation, scientific research and development, our country has given some support, but with the current level of market demand and overseas, there remains no small gap, in particular in: less product variety, low level quality of instability, early failure rate, and poor reliability.
China Machine Components product variety, small size, especially a big gap between high-end products can not meet the growing needs of the host. At present, various types of host based piece of performance indicators is roughly equivalent to the level of foreign 20th century 80s. Quality of instability, early failure rate, reliability is poor, the Achilles heel of basic items. Therefore, many OEMs to enhance the market competitiveness of its host, often choose to import the basis of supporting documents, resulting in domestic basic parts, especially the low-tech products, the domestic market share declined. Although China's exports of basic items has obvious advantages, but mainly labor-intensive products, the number of large, low-value, technology added value.
Present, China Machine Components Industry of the following main issues: First, redundant construction seriously, the low degree of specialization, not form scale, low economic efficiency, Machine Components, compared with the host enterprises to establish an initial financial and technical inputs required relatively few times in the national economic development period, have increased the number of basic parts manufacturer, also appeared along a large number of low-level duplicated construction, multi-point, volume is small, not form economies of scale. Basic pieces of business, while gradually independent of the OE, but most of the enterprise itself is large and, small but complete, low degree of specialization, the level of equipment is not high, the quality of instability, low economic efficiency. If China Bearing Annual output of three large enterprise sector bearing less than the sum of a well-known foreign companies 50%. The past two years, China built nearly one hundred Hydraulic Parts Plant, but the annual output of 300,000 or more only a few, the main product is Agricultural Machinery Matching. The company's annual output of Germany Rexroth hydraulic items 1.3 million, the Japanese oil research (strain) is also an annual output of 600,000 or more. Industrialized countries die of about 150 000 companies per capita output to 20 million, China's only 4 million to 50 thousand yuan. In recent years, with a variety of common development policies, the ownership, basic parts industry is experiencing increasingly focus from scattered to the intensive development process.
Fisher Capital Equipment Management Update- Machine Components Industry in China Problems and their causes - the machinery, basic parts - construction machinery industry Avoid online internet scams, get latest updates on Fisher Capital Equipment Management website.
Second, weak research and development, insufficient capital investment, technological progress is slow. Basic pieces of 70 different industries in the late 20th century, early 80s to early introduction of a number of foreign advanced technology, but the lack of adequate absorption of the hardware and software investment. According to foreign experience, required for digestion and absorption of imported technology and capital ratio of approximately 1:7, and our understanding of this late, slow digestion and absorption steps. Technical strength of competition in the market is actually a contest. Have attached great importance to overseas, have increased investment, occupy high ground. Various well-known companies for research and development funds account for its Sell Amount of 4% to 5%, 10% in key areas. Although many institutions of higher learning in China at present engaged in research work, a lot of theoretical research, scientific research, patents, and papers have a very high level, but actual production is not tightly integrated, especially into commodities slow.
Third and related raw materials, backward technology, low level of technology and technological equipment the foundation of the development constraints.
Fasteners, chains, springs, bearings, molds and other steel products used by the poor quality specifications less direct impact on the quality of basic items, while the hydraulic pressure and hydraulic pressure castings and quality of products related to electronic control technology backward, but also directly affect the quality and reliability of hydraulic components. Mechanical parts are generally based on batch, mass production, but also more variety, high precision machining products, and therefore require high technology and equipment production, large investment. Foreign multi-use high efficiency and precision of the plane, line or soft line for efficient automated production. However, some basic pieces of our business by financial constraints input small businesses transform themselves poor, less advanced equipment not matching, affect product quality and quality.
(WIDEPR - PR NEWS PORTAL) Fisher Capital Equipment Management Update- Machine Components Industry in China Problems and their causes - the machinery, basic parts - construction machinery industry Avoid online internet scams, get latest updates on Fisher Capital Equipment Management website. As our country on the basis of pieces of machinery in Machinery Industry Awareness of the importance of late, long-term lack of investment, leading the entire industry based on poor, weak economic foundation and strength of the weak. In particular, as the host country rises the level of basic pieces of machinery behind the main bottleneck is becoming more apparent. In recent years, although the introduction of technology, technological innovation, scientific research and development, our country has given some support, but with the current level of market demand and overseas, there remains no small gap, in particular in: less product variety, low level quality of instability, early failure rate, and poor reliability.
China Machine Components product variety, small size, especially a big gap between high-end products can not meet the growing needs of the host. At present, various types of host based piece of performance indicators is roughly equivalent to the level of foreign 20th century 80s. Quality of instability, early failure rate, reliability is poor, the Achilles heel of basic items. Therefore, many OEMs to enhance the market competitiveness of its host, often choose to import the basis of supporting documents, resulting in domestic basic parts, especially the low-tech products, the domestic market share declined. Although China's exports of basic items has obvious advantages, but mainly labor-intensive products, the number of large, low-value, technology added value.
Present, China Machine Components Industry of the following main issues: First, redundant construction seriously, the low degree of specialization, not form scale, low economic efficiency, Machine Components, compared with the host enterprises to establish an initial financial and technical inputs required relatively few times in the national economic development period, have increased the number of basic parts manufacturer, also appeared along a large number of low-level duplicated construction, multi-point, volume is small, not form economies of scale. Basic pieces of business, while gradually independent of the OE, but most of the enterprise itself is large and, small but complete, low degree of specialization, the level of equipment is not high, the quality of instability, low economic efficiency. If China Bearing Annual output of three large enterprise sector bearing less than the sum of a well-known foreign companies 50%. The past two years, China built nearly one hundred Hydraulic Parts Plant, but the annual output of 300,000 or more only a few, the main product is Agricultural Machinery Matching. The company's annual output of Germany Rexroth hydraulic items 1.3 million, the Japanese oil research (strain) is also an annual output of 600,000 or more. Industrialized countries die of about 150 000 companies per capita output to 20 million, China's only 4 million to 50 thousand yuan. In recent years, with a variety of common development policies, the ownership, basic parts industry is experiencing increasingly focus from scattered to the intensive development process.
Fisher Capital Equipment Management Update- Machine Components Industry in China Problems and their causes - the machinery, basic parts - construction machinery industry Avoid online internet scams, get latest updates on Fisher Capital Equipment Management website.
Second, weak research and development, insufficient capital investment, technological progress is slow. Basic pieces of 70 different industries in the late 20th century, early 80s to early introduction of a number of foreign advanced technology, but the lack of adequate absorption of the hardware and software investment. According to foreign experience, required for digestion and absorption of imported technology and capital ratio of approximately 1:7, and our understanding of this late, slow digestion and absorption steps. Technical strength of competition in the market is actually a contest. Have attached great importance to overseas, have increased investment, occupy high ground. Various well-known companies for research and development funds account for its Sell Amount of 4% to 5%, 10% in key areas. Although many institutions of higher learning in China at present engaged in research work, a lot of theoretical research, scientific research, patents, and papers have a very high level, but actual production is not tightly integrated, especially into commodities slow.
Third and related raw materials, backward technology, low level of technology and technological equipment the foundation of the development constraints.
Fasteners, chains, springs, bearings, molds and other steel products used by the poor quality specifications less direct impact on the quality of basic items, while the hydraulic pressure and hydraulic pressure castings and quality of products related to electronic control technology backward, but also directly affect the quality and reliability of hydraulic components. Mechanical parts are generally based on batch, mass production, but also more variety, high precision machining products, and therefore require high technology and equipment production, large investment. Foreign multi-use high efficiency and precision of the plane, line or soft line for efficient automated production. However, some basic pieces of our business by financial constraints input small businesses transform themselves poor, less advanced equipment not matching, affect product quality and quality.
Fisher Capital Updates Avoid Scams - New Swiss Style Agency Nexturn
Most recently by the financial turmoil sweeping the globe, has been leading the international trend of the Europeanheavy truck.
(WIDEPR - PR NEWS PORTAL) Most recently by the financial turmoil sweeping the globe, has been leading the international trend of the European heavy truck heavy truck giant constantly laying off employees and cut-off of the news. Avoid scams. Keep posted and don’t be a victim.
2008 12 16, Sweden Volvo Truck Group headquarters in Gothenburg, announced first quarter 2009 will be discontinued 20 to 25 days to avoid a drop in demand caused by product mix. Earlier, the German truck maker Man (MAN) company announced major layoffs for temporary workers and cut production. Mercedes-Benz trucks were announced job cuts in Canada and the United States, 2300.
Chinese auto companies have gradually felt the tremendous power of this financial crisis. In the heavy truck market, the independent brand of electric control and high-pressure EGR Track Product spreads win one or two million in full swing, not to mention the high price of imported heavy card. The face of tough international market, the European heavy truck giant can turn "crisis" into "opportunities" in China for more effective business support?
Previous years, this time, each company will announce a new year of market objectives and development plans. But this year, most businesses still wait until. Interest rates, exchange rates frequently adjusted bailout plan were introduced, the situation changes so rapidly, so that hundreds of battles in the European heavy truck giant become more cautious than ever.
Benz trucks in China public relations manager, told reporters that Wang Hui, Mercedes-Benz on the Chinese market and customers long-term commitment is consistent. Slowdown in the current market circumstances, the Mercedes-Benz will continue to provide Chinese customers with high quality products and services. Meanwhile, Mercedes-Benz that the Chinese government to stimulate domestic demand, increasing investment in initiatives such as the opportunities for the commercial vehicle market, promising Chinese market, long-term, sustainable development.
Insiders commented that, compared with the domestic heavy truck, imported products have a distinct performance advantage. However, due to the special needs of our commercial vehicles, heavy trucks have been no imports of high-end open market, even as imports of passenger cars did not bring in huge profits for multinational corporations. At present, this situation has not changed.
Hard for many years in China, another giant of heavy trucks in Europe?? Volvo to the Chinese market showed cautious optimism. President of Volvo Trucks in China, said Lu Bo days, despite the international financial crisis, but the driving force for China's economic development still exist, with the timely measures taken by the relevant market better than in Europe and the United States. He said that both in good times or bad, both for China Volvo Cooperation Partner support, and will not lay off in China.
As the industry leader in commercial vehicles in Europe, Mercedes-Benz and Volvo is also China's imports of high-end heavy truck market leader, in recent years has annual sales of more than in 1000. Rely on much weaker than the company's own brand dealer network, can achieve such results is not easy, to keep victories is their primary goal. Man speaking for the company, but the adverse economic situation it saw an opportunity. Man Fischer, vice president of China, told reporters that the financial turmoil, China is likely in 2009 a temporary economic downturn. However, the Man for 2010 are optimistic about China's economic situation. On the one hand, the 4 trillion yuan in central government investment projects, traffic, transportation, logistics industry is the key; the other hand, the Chinese yuan to upgrade the user's purchasing power. By expanding dealer network to provide users of financial services and other measures, Mann hopes the Chinese market in 2009 heavy truck sales of more than 500 in 2010, and strive to reach 1,000 units in China imports high-end heavy truck market share from the current 8% to 20%.
China called the world's largest truck market, regardless of existing capacity or growth potential is very attractive. At present, the global economy are shrouded in shadow of financial turmoil, the Chinese market for multinational auto giants significantly increased the importance of the European heavy truck giant too. Although China's own brand of technical level of heavy truck brand products in Europe there is still a gap, but their progress over the years is obvious to all. The industry believes that both the Chinese heavy truck market prospects are also notable features. This feature is changing for the right to speak, the Chinese heavy truck industry has gradually become rules of the game makers. Only able to adapt to the rules of Chinese enterprises to share the fruits of victory.
Related Reading: 2009 debut all the new heavy truck market in China smoke resurgence
In the global financial crisis, China's heavy truck industry is facing the most strong market impact in history, many users are forced to report truck stop, a sharp decline in market demand, but as the beginning of large-scale infrastructure and fuel tax implementation, some experts predict that 2009 will be the second half of the Chinese heavy truck market is expected to rebound. Then, the face of the current severe situation, how companies can survive the winter; future market rebound when the business first opened, how can the situation? In the face of this issue, China's heavy truck manufacturers have thought they were talking to the product. Recently, the China Heavy Duty Truck, Shaanxi Auto, Fukuda, SAIC Iveco Hongyan, Valin successively announced their new 09 models, can be predicted that in 2009 China's heavy truck market, a war broke out did not smoke.
(WIDEPR - PR NEWS PORTAL) Most recently by the financial turmoil sweeping the globe, has been leading the international trend of the European heavy truck heavy truck giant constantly laying off employees and cut-off of the news. Avoid scams. Keep posted and don’t be a victim.
2008 12 16, Sweden Volvo Truck Group headquarters in Gothenburg, announced first quarter 2009 will be discontinued 20 to 25 days to avoid a drop in demand caused by product mix. Earlier, the German truck maker Man (MAN) company announced major layoffs for temporary workers and cut production. Mercedes-Benz trucks were announced job cuts in Canada and the United States, 2300.
Chinese auto companies have gradually felt the tremendous power of this financial crisis. In the heavy truck market, the independent brand of electric control and high-pressure EGR Track Product spreads win one or two million in full swing, not to mention the high price of imported heavy card. The face of tough international market, the European heavy truck giant can turn "crisis" into "opportunities" in China for more effective business support?
Previous years, this time, each company will announce a new year of market objectives and development plans. But this year, most businesses still wait until. Interest rates, exchange rates frequently adjusted bailout plan were introduced, the situation changes so rapidly, so that hundreds of battles in the European heavy truck giant become more cautious than ever.
Benz trucks in China public relations manager, told reporters that Wang Hui, Mercedes-Benz on the Chinese market and customers long-term commitment is consistent. Slowdown in the current market circumstances, the Mercedes-Benz will continue to provide Chinese customers with high quality products and services. Meanwhile, Mercedes-Benz that the Chinese government to stimulate domestic demand, increasing investment in initiatives such as the opportunities for the commercial vehicle market, promising Chinese market, long-term, sustainable development.
Insiders commented that, compared with the domestic heavy truck, imported products have a distinct performance advantage. However, due to the special needs of our commercial vehicles, heavy trucks have been no imports of high-end open market, even as imports of passenger cars did not bring in huge profits for multinational corporations. At present, this situation has not changed.
Hard for many years in China, another giant of heavy trucks in Europe?? Volvo to the Chinese market showed cautious optimism. President of Volvo Trucks in China, said Lu Bo days, despite the international financial crisis, but the driving force for China's economic development still exist, with the timely measures taken by the relevant market better than in Europe and the United States. He said that both in good times or bad, both for China Volvo Cooperation Partner support, and will not lay off in China.
As the industry leader in commercial vehicles in Europe, Mercedes-Benz and Volvo is also China's imports of high-end heavy truck market leader, in recent years has annual sales of more than in 1000. Rely on much weaker than the company's own brand dealer network, can achieve such results is not easy, to keep victories is their primary goal. Man speaking for the company, but the adverse economic situation it saw an opportunity. Man Fischer, vice president of China, told reporters that the financial turmoil, China is likely in 2009 a temporary economic downturn. However, the Man for 2010 are optimistic about China's economic situation. On the one hand, the 4 trillion yuan in central government investment projects, traffic, transportation, logistics industry is the key; the other hand, the Chinese yuan to upgrade the user's purchasing power. By expanding dealer network to provide users of financial services and other measures, Mann hopes the Chinese market in 2009 heavy truck sales of more than 500 in 2010, and strive to reach 1,000 units in China imports high-end heavy truck market share from the current 8% to 20%.
China called the world's largest truck market, regardless of existing capacity or growth potential is very attractive. At present, the global economy are shrouded in shadow of financial turmoil, the Chinese market for multinational auto giants significantly increased the importance of the European heavy truck giant too. Although China's own brand of technical level of heavy truck brand products in Europe there is still a gap, but their progress over the years is obvious to all. The industry believes that both the Chinese heavy truck market prospects are also notable features. This feature is changing for the right to speak, the Chinese heavy truck industry has gradually become rules of the game makers. Only able to adapt to the rules of Chinese enterprises to share the fruits of victory.
Related Reading: 2009 debut all the new heavy truck market in China smoke resurgence
In the global financial crisis, China's heavy truck industry is facing the most strong market impact in history, many users are forced to report truck stop, a sharp decline in market demand, but as the beginning of large-scale infrastructure and fuel tax implementation, some experts predict that 2009 will be the second half of the Chinese heavy truck market is expected to rebound. Then, the face of the current severe situation, how companies can survive the winter; future market rebound when the business first opened, how can the situation? In the face of this issue, China's heavy truck manufacturers have thought they were talking to the product. Recently, the China Heavy Duty Truck, Shaanxi Auto, Fukuda, SAIC Iveco Hongyan, Valin successively announced their new 09 models, can be predicted that in 2009 China's heavy truck market, a war broke out did not smoke.
How to avoid Engineering Scholarship Scams
Student or parents needs to be able to recognize the scholarship fraud profile. Following are top 10 Scholarship Scams.
1. The free seminar scam. Overwhelmed by all the information out there? Want to make the best financial aid decisions for you or your child? Often a free financial aid seminar is no more than a “come-on” for insurance sales pitches, matching services or investment products.
Signs that should make the warning bells go off: Are they using the hard sell? Sign-up today or the price shoots up tomorrow? Can only answer certain questions after you pay their fee? Wants your credit card information to “hold” a scholarship for you? Your ears should be ringing by now.
Remember, if you receive help from a consultant, he or she must sign the Free Application for Federal Student Aid (FAFSA). If the seminar sales rep refuses to do so, it is another alarm bell. And never let a company consultant suggest that you adjust your income on the FAFSA in order to receive more aid. It’s unethical (a crime even). And it can backfire, big time.
2. Scholarships for profit. Scholarships are designed for many purposes—recruit talented athletes, assist low income applicants, encourage study in an academic discipline, promote campus diversity, attract the best students—but profit should never be one of them. Scammers that award modest scholarships of $1,000 (or no scholarship at all) can collect many times over that amount in fees by attracting thousands of applicants. You may only be out the 15 bucks or so, but multiple that by 1,000 scholarship hopefuls just like you and you just made for a nice payday for the scholarship scam artist. Being denied such a scholarship does not make you undeserving—but just one more scammed applicant.
3. The advance-fee loan. A low-interest loan with an upfront fee? Don’t think so, and neither should you. Legitimate lenders deduct fees from at the time disbursement checks are issue; they do not charge fees before paying out the loan to a borrower. Be wary of any lender that asks for money upfront—that is a loan that will likely never materialize.
4. Your Financial Aid Office. Huh? Your college Financial Aid Office is a credible and free resource for education funding. But beware; the Education Department recently banned the practice of lenders offering financial incentives to universities that recommend their service as a preferred lender (the university often receiving a “cut” for the loan). The move was prompted by investigations showing that some university officials accepted gifts, payments or stock on favorable terms in exchange for such practices. In other instances, marketing representatives for lenders staffed phones at student aid offices. In an $85 billion student loan industry, you have to ask yourself if your university steered you to the lender with the best rate available, or simply the one lining their pockets. Ouch.
5. The guaranteed matching service. If Match.com can’t guarantee you Prince Charming and firmer abs, scholarship matching services cannot guarantee you money in the bank. Matching services that promise guaranteed matching sources for a processing fee of $49.95 (and much higher) will at best provide you with information available for free on the web. Take note that these services often inflate their database when an individual sponsor offers hundreds of scholarships.
The Better Business Bureau (BBB) reports that many of the sources provided by scholarship matching services are inaccurate and “few, if any at all, receive the actual funds”. The BBB adds that information provided is often out of date, providing sources for deadlines that have long passed. And never mind that money-back guarantee—it comes with more hoops to jump through than any dog-and-pony show you could ever imagine.
6. Linked products. Don’t let any sales person ever convince you that a financial product, such as student life insurance, or an annuity, must be purchased to qualify for federal student financial aid. It just isn’t so. And it is a sure fire scam.
7. The telemarketer. Telemarketing was once the biggest bugaboos of scholarship fraud when the FTC first addressed scholarship scams in the 90s. Attention more recently has shifted to bogus financial aid and scholarship seminars, and deceptive practices among consultants. That does not mean that telemarketing scams still do not surface. The U.S. Department of Education warned consumers recently about telemarketing scammers posing as U.S. Department of Education (ED) officers offering grants to students for a $249 processing fee (by requesting a bank or credit card number). Contact the DOE’s Office of Inspector General at
1-800-MIS-USED begin_of_the_skype_highlighting,
1-800-MIS-USED end_of_the_skype_highlighting
(1-800-647-8733 begin_of_the_skype_highlighting,
1-800-647-8733 end_of_the_skype_highlighting) or oig.hotline@ed.gov to learn more.
8. Guaranteed financial aid consultants. What can you expect for your fee from a financial aid consultant? Help completing the FAFSA, estimating your expected family contribution (EFC), and advising you or child on types of aid. Information and assistance that is readily available and free from a financial aid office at any university, your local library, on the web, or from a high school guidance counselor. So what is free, free, free information worth to you? Plenty, if you pay fees to a financial aid consultant to get it.
Some may want the handholding of a consultant regardless. Then be aware of deceptive claims that should send you looking for help from other sources. A financial aid consultant may guarantee a minimum $2,500 in aid or promise to refund your money. That’s nice, but misleading. Yes, you will no doubt receive that $2,500 student loan, but then so will every applicant who completes the FAFSA (free and on the web at www.fafsa.ed.gov). A federal entitlement available simply by completing the FAFSA should not be misrepresented or misconstrued as aid a consulting company can uniquely guarantee you as an enticement.
Likewise, if a consulting service guarantees you will receive every last penny to ship your child off to school (or your money back), you should not be fooled. You guessed it, another federal entitlement that is a byproduct of completing the FAFSA. That and a decent credit rating will earn you a PLUS loan for 100 percent of the total cost of attendance for you or your child. It is just good sense to steer clear of any company that entices clientele with benefits that are freely available to all students completing the FAFSA (whether they pay pricey consulting fees or not) as a federal entitlement.
Remember, if a consulting agency is completing a FAFSA (or any other form) on your behalf, review, sign it, and mail it yourself. You should maintain copies of the completed FAFSA and expect a refund if it is incorrect. And always agree to a flat fee for financial aid consulting services, never a percentage of aid received. Qualifications to consider when screening potential financial aid consultants include whether the consultant has experience at a financial aid office and is a Certified Public Accountant. Never be hesitant to ask for references.
9. The sweepstakes scholarship. Lucky you! You have just been selected as a finalist to win a scholarship in a sweepstakes that you never entered. (And you thought you never won anything.) The only obstacle standing between you and collecting your winnings is paying the redemption fee. Be wary of contests, websites and scholarships that collect personal data, payout a single dollar-amount (play the lottery today?) and repay the kindness with a barrage of advertisements. Which brings us to our next popular scam tactic.
10. The redemption fee.Common catchphrases by the scammer are disbursement fee, redemption fee, or processing fee. Notice the common denominator here? Legitimate scholarships do not ask a student to pay for an award. Be wary of any money awarded to you out of the blue that comes with strings, especially those with strings attached to your pocketbook.
Fisher Capital Equipment Tips - Construction Project Management and Civil Engineering Careers. Civil Engineer site - How to avoid Engineering Scholarship Scams
1. The free seminar scam. Overwhelmed by all the information out there? Want to make the best financial aid decisions for you or your child? Often a free financial aid seminar is no more than a “come-on” for insurance sales pitches, matching services or investment products.
Signs that should make the warning bells go off: Are they using the hard sell? Sign-up today or the price shoots up tomorrow? Can only answer certain questions after you pay their fee? Wants your credit card information to “hold” a scholarship for you? Your ears should be ringing by now.
Remember, if you receive help from a consultant, he or she must sign the Free Application for Federal Student Aid (FAFSA). If the seminar sales rep refuses to do so, it is another alarm bell. And never let a company consultant suggest that you adjust your income on the FAFSA in order to receive more aid. It’s unethical (a crime even). And it can backfire, big time.
2. Scholarships for profit. Scholarships are designed for many purposes—recruit talented athletes, assist low income applicants, encourage study in an academic discipline, promote campus diversity, attract the best students—but profit should never be one of them. Scammers that award modest scholarships of $1,000 (or no scholarship at all) can collect many times over that amount in fees by attracting thousands of applicants. You may only be out the 15 bucks or so, but multiple that by 1,000 scholarship hopefuls just like you and you just made for a nice payday for the scholarship scam artist. Being denied such a scholarship does not make you undeserving—but just one more scammed applicant.
3. The advance-fee loan. A low-interest loan with an upfront fee? Don’t think so, and neither should you. Legitimate lenders deduct fees from at the time disbursement checks are issue; they do not charge fees before paying out the loan to a borrower. Be wary of any lender that asks for money upfront—that is a loan that will likely never materialize.
4. Your Financial Aid Office. Huh? Your college Financial Aid Office is a credible and free resource for education funding. But beware; the Education Department recently banned the practice of lenders offering financial incentives to universities that recommend their service as a preferred lender (the university often receiving a “cut” for the loan). The move was prompted by investigations showing that some university officials accepted gifts, payments or stock on favorable terms in exchange for such practices. In other instances, marketing representatives for lenders staffed phones at student aid offices. In an $85 billion student loan industry, you have to ask yourself if your university steered you to the lender with the best rate available, or simply the one lining their pockets. Ouch.
5. The guaranteed matching service. If Match.com can’t guarantee you Prince Charming and firmer abs, scholarship matching services cannot guarantee you money in the bank. Matching services that promise guaranteed matching sources for a processing fee of $49.95 (and much higher) will at best provide you with information available for free on the web. Take note that these services often inflate their database when an individual sponsor offers hundreds of scholarships.
The Better Business Bureau (BBB) reports that many of the sources provided by scholarship matching services are inaccurate and “few, if any at all, receive the actual funds”. The BBB adds that information provided is often out of date, providing sources for deadlines that have long passed. And never mind that money-back guarantee—it comes with more hoops to jump through than any dog-and-pony show you could ever imagine.
6. Linked products. Don’t let any sales person ever convince you that a financial product, such as student life insurance, or an annuity, must be purchased to qualify for federal student financial aid. It just isn’t so. And it is a sure fire scam.
7. The telemarketer. Telemarketing was once the biggest bugaboos of scholarship fraud when the FTC first addressed scholarship scams in the 90s. Attention more recently has shifted to bogus financial aid and scholarship seminars, and deceptive practices among consultants. That does not mean that telemarketing scams still do not surface. The U.S. Department of Education warned consumers recently about telemarketing scammers posing as U.S. Department of Education (ED) officers offering grants to students for a $249 processing fee (by requesting a bank or credit card number). Contact the DOE’s Office of Inspector General at
1-800-MIS-USED begin_of_the_skype_highlighting,
1-800-MIS-USED end_of_the_skype_highlighting
(1-800-647-8733 begin_of_the_skype_highlighting,
1-800-647-8733 end_of_the_skype_highlighting) or oig.hotline@ed.gov to learn more.
8. Guaranteed financial aid consultants. What can you expect for your fee from a financial aid consultant? Help completing the FAFSA, estimating your expected family contribution (EFC), and advising you or child on types of aid. Information and assistance that is readily available and free from a financial aid office at any university, your local library, on the web, or from a high school guidance counselor. So what is free, free, free information worth to you? Plenty, if you pay fees to a financial aid consultant to get it.
Some may want the handholding of a consultant regardless. Then be aware of deceptive claims that should send you looking for help from other sources. A financial aid consultant may guarantee a minimum $2,500 in aid or promise to refund your money. That’s nice, but misleading. Yes, you will no doubt receive that $2,500 student loan, but then so will every applicant who completes the FAFSA (free and on the web at www.fafsa.ed.gov). A federal entitlement available simply by completing the FAFSA should not be misrepresented or misconstrued as aid a consulting company can uniquely guarantee you as an enticement.
Likewise, if a consulting service guarantees you will receive every last penny to ship your child off to school (or your money back), you should not be fooled. You guessed it, another federal entitlement that is a byproduct of completing the FAFSA. That and a decent credit rating will earn you a PLUS loan for 100 percent of the total cost of attendance for you or your child. It is just good sense to steer clear of any company that entices clientele with benefits that are freely available to all students completing the FAFSA (whether they pay pricey consulting fees or not) as a federal entitlement.
Remember, if a consulting agency is completing a FAFSA (or any other form) on your behalf, review, sign it, and mail it yourself. You should maintain copies of the completed FAFSA and expect a refund if it is incorrect. And always agree to a flat fee for financial aid consulting services, never a percentage of aid received. Qualifications to consider when screening potential financial aid consultants include whether the consultant has experience at a financial aid office and is a Certified Public Accountant. Never be hesitant to ask for references.
9. The sweepstakes scholarship. Lucky you! You have just been selected as a finalist to win a scholarship in a sweepstakes that you never entered. (And you thought you never won anything.) The only obstacle standing between you and collecting your winnings is paying the redemption fee. Be wary of contests, websites and scholarships that collect personal data, payout a single dollar-amount (play the lottery today?) and repay the kindness with a barrage of advertisements. Which brings us to our next popular scam tactic.
10. The redemption fee.Common catchphrases by the scammer are disbursement fee, redemption fee, or processing fee. Notice the common denominator here? Legitimate scholarships do not ask a student to pay for an award. Be wary of any money awarded to you out of the blue that comes with strings, especially those with strings attached to your pocketbook.
Fisher Capital Equipment Tips - Construction Project Management and Civil Engineering Careers. Civil Engineer site - How to avoid Engineering Scholarship Scams
New Swiss Style Agency Nexturn
Most recently by the financial turmoil sweeping the globe, has been leading the international trend of the European heavy truck heavy truck giant constantly laying off employees and cut-off of the news. Avoid scams. Keep posted and don’t be a victim.
2008 12 16, Sweden Volvo Truck Group headquarters in Gothenburg, announced first quarter 2009 will be discontinued 20 to 25 days to avoid a drop in demand caused by product mix. Earlier, the German truck maker Man (MAN) Company announced major layoffs for temporary workers and cut production. Mercedes-Benz trucks were announced job cuts in Canada and the United States, 2300.
Chinese auto companies have gradually felt the tremendous power of this financial crisis. In the heavy truck market, the independent brand of electric control and high-pressure EGR Track Product spreads win one or two million in full swing, not to mention the high price of imported heavy card. The face of tough international market, the European heavy truck giant can turn "crisis" into "opportunities" in China for more effective business support?
Previous years, this time, each company will announce a new year of market objectives and development plans. But this year, most businesses still wait until. Interest rates, exchange rates frequently adjusted bailout plan were introduced, the situation changes so rapidly, so that hundreds of battles in the European heavy truck giant become more cautious than ever.
Benz trucks in China public relations manager, told reporters that Wang Hui, Mercedes-Benz on the Chinese market and customers’ long-term commitment is consistent. Slowdown in the current market circumstances, the Mercedes-Benz will continue to provide Chinese customers with high quality products and services. Meanwhile, Mercedes-Benz that the Chinese government to stimulate domestic demand, increasing investment in initiatives such as the opportunities for the commercial vehicle market, promising Chinese market, long-term, sustainable development.
Insiders commented that, compared with the domestic heavy truck, imported products have a distinct performance advantage. However, due to the special needs of our commercial vehicles, heavy trucks have been no imports of high-end open market, even as imports of passenger cars did not bring in huge profits for multinational corporations. At present, this situation has not changed.
Hard for many years in China, another giant of heavy trucks in Europe?? Volvo to the Chinese market showed cautious optimism. President of Volvo Trucks in China, said Lu Bo days, despite the international financial crisis, but the driving force for China's economic development still exist, with the timely measures taken by the relevant market better than in Europe and the United States. He said that both in good times or bad, both for China Volvo Cooperation Partner support, and will not lay off in China.
As the industry leader in commercial vehicles in Europe, Mercedes-Benz and Volvo is also China's imports of high-end heavy truck market leader, in recent years has annual sales of more than in 1000. Rely on much weaker than the company's own brand dealer network, can achieve such results is not easy, to keep victories is their primary goal. Man speaking for the company, but the adverse economic situation it saw an opportunity. Man Fischer, vice president of China, told reporters that the financial turmoil, China is likely in 2009 a temporary economic downturn. However, the Man for 2010 is optimistic about China's economic situation. On the one hand, the 4 trillion yuan in central government investment projects, traffic, transportation, logistics industry is the key; the other hand, the Chinese yuan to upgrade the user's purchasing power. By expanding dealer network to provide users of financial services and other measures, Mann hopes the Chinese market in 2009 heavy truck sales of more than 500 in 2010, and strive to reach 1,000 units in China imports high-end heavy truck market share from the current 8% to 20%.
China called the world's largest truck market, regardless of existing capacity or growth potential is very attractive. At present, the global economy are shrouded in shadow of financial turmoil, the Chinese market for multinational auto giants significantly increased the importance of the European heavy truck giant too. Although China's own brand of technical level of heavy truck brand products in Europe there is still a gap, but their progress over the years is obvious to all. The industry believes that both the Chinese heavy truck market prospects are also notable features. This feature is changing for the right to speak; the Chinese heavy truck industry has gradually become rules of the game makers. Only able to adapt to the rules of Chinese enterprises to share the fruits of victory.
Related Reading: 2009 debut all the new heavy truck market in China smoke resurgence
In the global financial crisis, China's heavy truck industry is facing the most strong market impact in history, many users are forced to report truck stop, a sharp decline in market demand, but as the beginning of large-scale infrastructure and fuel tax implementation, some experts predict that 2009 will be the second half of the Chinese heavy truck market is expected to rebound. Then, the face of the current severe situation, how companies can survive the winter; future market rebound when the business first opened, how can the situation? In the face of this issue, China's heavy truck manufacturers have thought they were talking to the product. Recently, the China Heavy Duty Truck, Shaanxi Auto, Fukuda, SAIC Iveco Hongyan, Valin successively announced their new 09 models, can be predicted that in 2009 China's heavy truck market, a war broke out did not smoke.
2008 12 16, Sweden Volvo Truck Group headquarters in Gothenburg, announced first quarter 2009 will be discontinued 20 to 25 days to avoid a drop in demand caused by product mix. Earlier, the German truck maker Man (MAN) Company announced major layoffs for temporary workers and cut production. Mercedes-Benz trucks were announced job cuts in Canada and the United States, 2300.
Chinese auto companies have gradually felt the tremendous power of this financial crisis. In the heavy truck market, the independent brand of electric control and high-pressure EGR Track Product spreads win one or two million in full swing, not to mention the high price of imported heavy card. The face of tough international market, the European heavy truck giant can turn "crisis" into "opportunities" in China for more effective business support?
Previous years, this time, each company will announce a new year of market objectives and development plans. But this year, most businesses still wait until. Interest rates, exchange rates frequently adjusted bailout plan were introduced, the situation changes so rapidly, so that hundreds of battles in the European heavy truck giant become more cautious than ever.
Benz trucks in China public relations manager, told reporters that Wang Hui, Mercedes-Benz on the Chinese market and customers’ long-term commitment is consistent. Slowdown in the current market circumstances, the Mercedes-Benz will continue to provide Chinese customers with high quality products and services. Meanwhile, Mercedes-Benz that the Chinese government to stimulate domestic demand, increasing investment in initiatives such as the opportunities for the commercial vehicle market, promising Chinese market, long-term, sustainable development.
Insiders commented that, compared with the domestic heavy truck, imported products have a distinct performance advantage. However, due to the special needs of our commercial vehicles, heavy trucks have been no imports of high-end open market, even as imports of passenger cars did not bring in huge profits for multinational corporations. At present, this situation has not changed.
Hard for many years in China, another giant of heavy trucks in Europe?? Volvo to the Chinese market showed cautious optimism. President of Volvo Trucks in China, said Lu Bo days, despite the international financial crisis, but the driving force for China's economic development still exist, with the timely measures taken by the relevant market better than in Europe and the United States. He said that both in good times or bad, both for China Volvo Cooperation Partner support, and will not lay off in China.
As the industry leader in commercial vehicles in Europe, Mercedes-Benz and Volvo is also China's imports of high-end heavy truck market leader, in recent years has annual sales of more than in 1000. Rely on much weaker than the company's own brand dealer network, can achieve such results is not easy, to keep victories is their primary goal. Man speaking for the company, but the adverse economic situation it saw an opportunity. Man Fischer, vice president of China, told reporters that the financial turmoil, China is likely in 2009 a temporary economic downturn. However, the Man for 2010 is optimistic about China's economic situation. On the one hand, the 4 trillion yuan in central government investment projects, traffic, transportation, logistics industry is the key; the other hand, the Chinese yuan to upgrade the user's purchasing power. By expanding dealer network to provide users of financial services and other measures, Mann hopes the Chinese market in 2009 heavy truck sales of more than 500 in 2010, and strive to reach 1,000 units in China imports high-end heavy truck market share from the current 8% to 20%.
China called the world's largest truck market, regardless of existing capacity or growth potential is very attractive. At present, the global economy are shrouded in shadow of financial turmoil, the Chinese market for multinational auto giants significantly increased the importance of the European heavy truck giant too. Although China's own brand of technical level of heavy truck brand products in Europe there is still a gap, but their progress over the years is obvious to all. The industry believes that both the Chinese heavy truck market prospects are also notable features. This feature is changing for the right to speak; the Chinese heavy truck industry has gradually become rules of the game makers. Only able to adapt to the rules of Chinese enterprises to share the fruits of victory.
Related Reading: 2009 debut all the new heavy truck market in China smoke resurgence
In the global financial crisis, China's heavy truck industry is facing the most strong market impact in history, many users are forced to report truck stop, a sharp decline in market demand, but as the beginning of large-scale infrastructure and fuel tax implementation, some experts predict that 2009 will be the second half of the Chinese heavy truck market is expected to rebound. Then, the face of the current severe situation, how companies can survive the winter; future market rebound when the business first opened, how can the situation? In the face of this issue, China's heavy truck manufacturers have thought they were talking to the product. Recently, the China Heavy Duty Truck, Shaanxi Auto, Fukuda, SAIC Iveco Hongyan, Valin successively announced their new 09 models, can be predicted that in 2009 China's heavy truck market, a war broke out did not smoke.
Tuesday, January 25, 2011
Komatsu America Corp. Introduces the WA1200-6 Wheel Loader
Fisher Capital News Update: Keep updated on recent events, press releases and latest machineries to avoid scam.
FISHER CAPITAL CONSTRUCTION MANAGEMENT - Construction Machineries, Suppliers Directory and Others. Meets EPA Tier 2 Emissions Regulation With More Horse Power, Reliability, Durability, Lower Fuel Consumption, Increased Productivity, Enhanced Operator Cab and Easier Maintenance, 1892 Gross HP (SAE J1995), 1765 Net HP (SAE J1349) @ 1800 rpm, Engine RPM control system with auto deceleration New variable transmission cut-off system, New dual-mode active working hydraulic system, Additional torque converter cooler, Increased hydraulic cooling capacity, Extended service intervals
Rolling Meadows, IL, September 8, 2010 — Komatsu America Corp. (KAC) today introduced its new WA1200-6 Wheel Loader for use in mining applications. Based on extensive customer input and feedback, the new loader includes environmental, technological and ergonomic enhancements for even greater productivity, while lowering operating costs.
The new WA1200-6 is powered by a highly-efficient Komatsu SAADA16V160E-2 engine that delivers 1892 Gross HP at 1800 RPM. With an operating weight of 477,100 lbs., the new loader offers increased fuel efficiency, while meeting all EPA Tier 2 emissions requirements.
Special features of the WA1200-6 include:
Productivity Performance
The engine net output of the WA1200-6 has been increased by 132 HP to 1765 HP at 1800 RPM. The use of an electronic governor results in low fuel consumption, with quick throttle response to match the machine’s powerful tractive effort and fast hydraulic response.
The new dual-mode active working hydraulic system allows the operator to select between normal and powerful loading, while the optimum oil flow in the working system increases efficiency and reduces cycle times. Increased engine output and the optimized hydraulic system provide outstanding production and performance.
Operator Enhancements
The engine RPM control system with auto deceleration allows the operator to set the engine RPM at the optimum work performance level and control speed smoothly with the accelerator. The variable transmission cut-off system for the left brake pedal is adjustable by a switch at the operator’s seat. When loading, the low setting reduces brake impact to prevent spillage, while the high setting can be used for traveling.
Improved Reliability and Durability
An additional torque converter cooler was added as standard equipment to reduce oil temperature and increase cooling capacity. For hydraulic cooling, a new pump with increased oil capacity was added and the circulation was revised to lower oil temperature. Two additional air cleaners were added and the size of the elements increased to 15 inches for more capacity.
Komatsu America Partners with Pedregon Racing, Two-time NHRA Funny Car world champion Tony Pedregon’s Chevrolet Funny Car will feature primary sponsorship from Komatsu America Corp. for the O’Reilly Auto Parts NHRA Nationals, Sept. 17-19, at Charlotte, NC.
“Komatsu America is excited to be sponsoring Tony Pedregon’s car,” said Erik Wilde, Vice President, Product Marketing, Komatsu America Corp. “Tony’s reputation as a world champion aligns well with Komatsu’s world-wide reputation for producing outstanding equipment.”
Komatsu will also be an associate sponsor on the Pedregon Racing Funny Car and on Cruz Pedregon’s Snap-on Racing Tools Funny Car, with races slated for Sept. 23-26 at Dallas, TX, Oct. 7-10 at Reading, PA, Oct. 28-31 at Las Vegas, NV, and Nov. 11-14 at Pomona, CA.
“Komatsu is an international leader in the field of construction and mining equipment,” said Pedregon during the announcement. “We are pleased to promote awareness of the brand to our race fans as well as the Komatsu dealers and their customers.”
Tony Pedregon is one of 10 Funny Car drivers competing for final positions in NHRA’s Countdown to 1 playoffs. This weekend’s event is the second of six title-deciding races.
Komatsu America Corp. is a U.S. subsidiary of Komatsu Ltd. which is the world’s second largest manufacturer and supplier of construction, mining and compact construction equipment. Komatsu America also serves forklift and forestry markets. Through its distributor network, Komatsu offers a state-of-the-art parts and service program to support the equipment. Komatsu has proudly been providing high-quality reliable products for nearly a century. Visit the website at www.komatsuamerica.com for more information.
FISHER CAPITAL CONSTRUCTION MANAGEMENT - Construction Machineries, Suppliers Directory and Others. Meets EPA Tier 2 Emissions Regulation With More Horse Power, Reliability, Durability, Lower Fuel Consumption, Increased Productivity, Enhanced Operator Cab and Easier Maintenance, 1892 Gross HP (SAE J1995), 1765 Net HP (SAE J1349) @ 1800 rpm, Engine RPM control system with auto deceleration New variable transmission cut-off system, New dual-mode active working hydraulic system, Additional torque converter cooler, Increased hydraulic cooling capacity, Extended service intervals
Rolling Meadows, IL, September 8, 2010 — Komatsu America Corp. (KAC) today introduced its new WA1200-6 Wheel Loader for use in mining applications. Based on extensive customer input and feedback, the new loader includes environmental, technological and ergonomic enhancements for even greater productivity, while lowering operating costs.
The new WA1200-6 is powered by a highly-efficient Komatsu SAADA16V160E-2 engine that delivers 1892 Gross HP at 1800 RPM. With an operating weight of 477,100 lbs., the new loader offers increased fuel efficiency, while meeting all EPA Tier 2 emissions requirements.
Special features of the WA1200-6 include:
Productivity Performance
The engine net output of the WA1200-6 has been increased by 132 HP to 1765 HP at 1800 RPM. The use of an electronic governor results in low fuel consumption, with quick throttle response to match the machine’s powerful tractive effort and fast hydraulic response.
The new dual-mode active working hydraulic system allows the operator to select between normal and powerful loading, while the optimum oil flow in the working system increases efficiency and reduces cycle times. Increased engine output and the optimized hydraulic system provide outstanding production and performance.
Operator Enhancements
The engine RPM control system with auto deceleration allows the operator to set the engine RPM at the optimum work performance level and control speed smoothly with the accelerator. The variable transmission cut-off system for the left brake pedal is adjustable by a switch at the operator’s seat. When loading, the low setting reduces brake impact to prevent spillage, while the high setting can be used for traveling.
Improved Reliability and Durability
An additional torque converter cooler was added as standard equipment to reduce oil temperature and increase cooling capacity. For hydraulic cooling, a new pump with increased oil capacity was added and the circulation was revised to lower oil temperature. Two additional air cleaners were added and the size of the elements increased to 15 inches for more capacity.
Komatsu America Partners with Pedregon Racing, Two-time NHRA Funny Car world champion Tony Pedregon’s Chevrolet Funny Car will feature primary sponsorship from Komatsu America Corp. for the O’Reilly Auto Parts NHRA Nationals, Sept. 17-19, at Charlotte, NC.
“Komatsu America is excited to be sponsoring Tony Pedregon’s car,” said Erik Wilde, Vice President, Product Marketing, Komatsu America Corp. “Tony’s reputation as a world champion aligns well with Komatsu’s world-wide reputation for producing outstanding equipment.”
Komatsu will also be an associate sponsor on the Pedregon Racing Funny Car and on Cruz Pedregon’s Snap-on Racing Tools Funny Car, with races slated for Sept. 23-26 at Dallas, TX, Oct. 7-10 at Reading, PA, Oct. 28-31 at Las Vegas, NV, and Nov. 11-14 at Pomona, CA.
“Komatsu is an international leader in the field of construction and mining equipment,” said Pedregon during the announcement. “We are pleased to promote awareness of the brand to our race fans as well as the Komatsu dealers and their customers.”
Tony Pedregon is one of 10 Funny Car drivers competing for final positions in NHRA’s Countdown to 1 playoffs. This weekend’s event is the second of six title-deciding races.
Komatsu America Corp. is a U.S. subsidiary of Komatsu Ltd. which is the world’s second largest manufacturer and supplier of construction, mining and compact construction equipment. Komatsu America also serves forklift and forestry markets. Through its distributor network, Komatsu offers a state-of-the-art parts and service program to support the equipment. Komatsu has proudly been providing high-quality reliable products for nearly a century. Visit the website at www.komatsuamerica.com for more information.
New Options in Guided Boring, Fisher Capital Equipment Management Update
The Akkerman team, continually committed to increasing the
versatility of our products, recently launched several new
components for our GBM line of equipment.
Fisher Capital Equipment leasing news update from different suppliers. Fisher Capital Equipment Management leasing gives you fresh events and updates on Construction Machineries, Suppliers Directory and Others to keep away from scam from Unsolicited, "Pre-Qualified credit line" mass mailings
The Powered Reaming Head (PRH) upsizing kit for its Guided
Boring Machine (GBM) system was released. This GBM accessory
allows owners to bore multiple pipe diameters with just one
set of 11” OD (279 mm) thrust casings and augers. The base
14” (356 mm) OD PRH unit features 16” (406 mm) and 20” (508
mm) OD increaser kits and corresponding pipe adapter rings to
accommodate up to 20” (508 mm) OD pipe. All PRH components
rest on a customized rack for ease of transport and orderliness
on the job site. The PRH front and rear sections can be launched
separately to accommodate minimal diameter shafts. The PRH
kit performs well with all Akkerman power packs and jacking
frames.
The P150Q Power Pack provides hydraulic power to the GBM
jacking frame and Powered Cutter Head for smooth and efficient
operation. The P150Q houses a 154 HP (115 kw) diesel engine.
Its three load-sensing variable displacement axial piston pumps
independently operate the jacking, rotation and PCH. It also
features a 100 gal (378 L) fuel tank and 50 gal (189 L) hydraulic
oil reservoir.
The Jetting and Lubrication pump underwent a design
reconfiguration for enhanced compactness. It features
independent hydrostatic flow connections, bulkhead
connections for pressure and return lines and an easily
serviceable open/close valve on the tank outlet. Customers may choose the 3,000 rpm, 30 HP (7 kW)
diesel engine or 1,750 rpm, 30 HP (7 kW) electric motor. Each 325 gal (1,230 L) tank is positioned sideby-
side on a pallet-like base. The 2,500 psi (17,237 kPa) high-pressure jetting pump assists the GBM
system’s excavation process by lubricating cutter bits and spoils. An in-line suction filter protects the
pump from contaminants in the water. The 150 maximum psi (1,034 kPa) lubrication pump flows at 4
gpm (15 L/min) and features an agitator which mixes the lubrication quickly and keeps it consistent
throughout production.
For more information on these and other GBM products, please contact our friendly sales staff or an
international representative.
Akkerman Inc. is positioned for sales in new markets with recently established representation
in the Middle East, India, Russia and Singapore. Agreements with Trenchers Land Digging
& Filling LLC, based in the United Arab Emirates, Asia Contech Ltd. of India, Intertorg Russia and
ICE Far East in Singapore pioneer exciting prospects for Akkerman Inc. worldwide.
Trenchers Land Digging & Filling LLC of Dubai recently facilitated the sale of a complete Guided
Boring Machine (GBM) system for a Kuwait contractor. This sale denotes the first GBM system
sold in the Middle East as well as the most powerful pilot tube microtunneling configuration
available. The 4812A jacking frame with 200 tons of thrust, 275T power pack, Powered Cutter
Head and Jetting and Lubrication pump will install DN 300-1,000 mm pipes for drives up to
150 m long.
Asia Contech Ltd. of New Delhi, providing sales and service of Akkerman equipment in India,
also represents trenchless companies American Augers, ASTEC and Trencor. ICE Far East
of Singapore, a south east Asia office for International Construction Equipment (ICE) will
represent Akkerman in this region. Intertorg of Moscow, a US based company with expertise
in the Russian trenchless market, has been a longtime dealer for Ditch Witch and previously
represented Lovat, Soltau and MTS equipment.
Akkerman welcomes these organizations into its community of sales representatives. Tunnel
Engineering Services in the United Kingdom, Ditch Witch of Australia, Virtual Engineering of
Columbia and the Alinea Group of Mexico have been agents of Akkerman for many years.
Additional representatives have been appointed in Egypt, Turkey, Bulgaria, Poland, Brazil, Italy
and Pakistan. For a full listing of equipment representatives, please review the “Contact Us”
page on the Akkerman website.
versatility of our products, recently launched several new
components for our GBM line of equipment.
Fisher Capital Equipment leasing news update from different suppliers. Fisher Capital Equipment Management leasing gives you fresh events and updates on Construction Machineries, Suppliers Directory and Others to keep away from scam from Unsolicited, "Pre-Qualified credit line" mass mailings
The Powered Reaming Head (PRH) upsizing kit for its Guided
Boring Machine (GBM) system was released. This GBM accessory
allows owners to bore multiple pipe diameters with just one
set of 11” OD (279 mm) thrust casings and augers. The base
14” (356 mm) OD PRH unit features 16” (406 mm) and 20” (508
mm) OD increaser kits and corresponding pipe adapter rings to
accommodate up to 20” (508 mm) OD pipe. All PRH components
rest on a customized rack for ease of transport and orderliness
on the job site. The PRH front and rear sections can be launched
separately to accommodate minimal diameter shafts. The PRH
kit performs well with all Akkerman power packs and jacking
frames.
The P150Q Power Pack provides hydraulic power to the GBM
jacking frame and Powered Cutter Head for smooth and efficient
operation. The P150Q houses a 154 HP (115 kw) diesel engine.
Its three load-sensing variable displacement axial piston pumps
independently operate the jacking, rotation and PCH. It also
features a 100 gal (378 L) fuel tank and 50 gal (189 L) hydraulic
oil reservoir.
The Jetting and Lubrication pump underwent a design
reconfiguration for enhanced compactness. It features
independent hydrostatic flow connections, bulkhead
connections for pressure and return lines and an easily
serviceable open/close valve on the tank outlet. Customers may choose the 3,000 rpm, 30 HP (7 kW)
diesel engine or 1,750 rpm, 30 HP (7 kW) electric motor. Each 325 gal (1,230 L) tank is positioned sideby-
side on a pallet-like base. The 2,500 psi (17,237 kPa) high-pressure jetting pump assists the GBM
system’s excavation process by lubricating cutter bits and spoils. An in-line suction filter protects the
pump from contaminants in the water. The 150 maximum psi (1,034 kPa) lubrication pump flows at 4
gpm (15 L/min) and features an agitator which mixes the lubrication quickly and keeps it consistent
throughout production.
For more information on these and other GBM products, please contact our friendly sales staff or an
international representative.
Akkerman Inc. is positioned for sales in new markets with recently established representation
in the Middle East, India, Russia and Singapore. Agreements with Trenchers Land Digging
& Filling LLC, based in the United Arab Emirates, Asia Contech Ltd. of India, Intertorg Russia and
ICE Far East in Singapore pioneer exciting prospects for Akkerman Inc. worldwide.
Trenchers Land Digging & Filling LLC of Dubai recently facilitated the sale of a complete Guided
Boring Machine (GBM) system for a Kuwait contractor. This sale denotes the first GBM system
sold in the Middle East as well as the most powerful pilot tube microtunneling configuration
available. The 4812A jacking frame with 200 tons of thrust, 275T power pack, Powered Cutter
Head and Jetting and Lubrication pump will install DN 300-1,000 mm pipes for drives up to
150 m long.
Asia Contech Ltd. of New Delhi, providing sales and service of Akkerman equipment in India,
also represents trenchless companies American Augers, ASTEC and Trencor. ICE Far East
of Singapore, a south east Asia office for International Construction Equipment (ICE) will
represent Akkerman in this region. Intertorg of Moscow, a US based company with expertise
in the Russian trenchless market, has been a longtime dealer for Ditch Witch and previously
represented Lovat, Soltau and MTS equipment.
Akkerman welcomes these organizations into its community of sales representatives. Tunnel
Engineering Services in the United Kingdom, Ditch Witch of Australia, Virtual Engineering of
Columbia and the Alinea Group of Mexico have been agents of Akkerman for many years.
Additional representatives have been appointed in Egypt, Turkey, Bulgaria, Poland, Brazil, Italy
and Pakistan. For a full listing of equipment representatives, please review the “Contact Us”
page on the Akkerman website.
HeatSponge SIDEKICK Warning, Finally Revealed: Boiler Room Equipment, Inc
Fisher Capital on Boiler Room Equipment, Inc, is very proud to finally unveil the SIDEKICK line of condensing boiler economizers for commercial and industrial hot water boilers. The Sidekick has been in development for nearly two years and represents an evolutionary development of high-efficiency installations in the boiler industry. The SIDEKICK is a warning game changer the likes of which have not been experienced since the introduction of the first condensing boilers. The SIDEKICK offers the ability to integrate condensing boiler efficiencies to conventional boilers on a new or retrofit basis. The SIDEKICK allows a customer with a conventional boiler system the ability to realize condensing efficiency gains that otherwise would require the existing boiler to be demolished and replaced with a new condensing boiler. Conventional, non-condensing boilers can now realize the efficiency benefits of outdoor air temperature reset controls and lower circulating hot water loop temperatures. Sidekicks also allow for duel fuel condensing applications utilizing conventional boilers. The SIDEKICK features all stainless internal construction, stainless tubes and fins, and an insulated outer casing. Inspection and clean out ports make periodic maintenance and cleaning easy.
The efficiency of the SIDEKICK goes far beyond simply energy recovery to the ultra-productive process in which it is selected and designed. Heat recovery for condensing applications introduces a significant number of variables that makes a catalog-approach to equipment selection nearly impossible. Boilerroom Equipment has developed a new method of quantifying heat recovery, the Recovery Rate, and integrated this into the design. The incorporation of the Recovery Rate variable allows a customer to custom tailor the level of heat recovery and cost directly to the requirements of each specific application. We define this new concept in heat recovery design as 3D Modularity, for modular construction in three dimensions. Based on a "Mass-Customization" approach to product development, Bruce will consider all of the application design constraints and will design a SIDEKICK optimized to meet the exact performance requirements at the most competitive price. Bruce has been given the ability to consider all aspects of the heat exchanger design relative to the price of the equipment and generate a fully priced proposal all in real-time; a software and engineering accomplishment that added over one thousand hours of coding and heat transfer modification to Bruce's core program. This means Bruce can handle all inquiries and generate proposals in real time by himself. The near elimination of sales and support overhead and significantly reduced project execution overhead requirements the Bruce software provides allows us to offer a product superior to any before it at pricing and responsiveness levels no conventional competitor could hope to match.
Bruce will go on-line live on Monday December 21st with full public access to the Sidekick software. BEI will display the SIDEKICK in public at the upcoming AHR Exposition in Orlando, booth 3126. We will also have other HeatSponge models on display and based on the popularity in Chicago last year will bring the HeatSponge NASCAR Late Model stock car back for another display appearance.
The efficiency of the SIDEKICK goes far beyond simply energy recovery to the ultra-productive process in which it is selected and designed. Heat recovery for condensing applications introduces a significant number of variables that makes a catalog-approach to equipment selection nearly impossible. Boilerroom Equipment has developed a new method of quantifying heat recovery, the Recovery Rate, and integrated this into the design. The incorporation of the Recovery Rate variable allows a customer to custom tailor the level of heat recovery and cost directly to the requirements of each specific application. We define this new concept in heat recovery design as 3D Modularity, for modular construction in three dimensions. Based on a "Mass-Customization" approach to product development, Bruce will consider all of the application design constraints and will design a SIDEKICK optimized to meet the exact performance requirements at the most competitive price. Bruce has been given the ability to consider all aspects of the heat exchanger design relative to the price of the equipment and generate a fully priced proposal all in real-time; a software and engineering accomplishment that added over one thousand hours of coding and heat transfer modification to Bruce's core program. This means Bruce can handle all inquiries and generate proposals in real time by himself. The near elimination of sales and support overhead and significantly reduced project execution overhead requirements the Bruce software provides allows us to offer a product superior to any before it at pricing and responsiveness levels no conventional competitor could hope to match.
Bruce will go on-line live on Monday December 21st with full public access to the Sidekick software. BEI will display the SIDEKICK in public at the upcoming AHR Exposition in Orlando, booth 3126. We will also have other HeatSponge models on display and based on the popularity in Chicago last year will bring the HeatSponge NASCAR Late Model stock car back for another display appearance.
The Boiler Room: GOLD CORPORATE MARKETING PARTNER Unilux Advanced Manufacturing
Unilux is the world’s original 5 pass forced draft bent tube boiler wit no room for inaccuracy. With over thirty years of manufacturing and operational experience in just about every industry requiring boilers, Unilux stands alone as the most pristine, highly engineered, ultimate quality boiler in it’s class. While the product speaks volumes, our success is our people; many with over 25 years at Unilux, we take enormous pride in every unit we manufacture. From immediate response to inquiries, performance data, drawings, product description and assistance with proper selection, everyone at Unilux has one important goal in mind…customer satisfaction. Unilux QA/QC boasts a stringent, internal program that emphasizes employee responsibility to safety, product and quality performance.
Richard Fisher of The Boiler Room: Unilux Advanced Manufacturing - Construction for all Unilux boilers starts with the vessel. All vessel material is controlled, ASME compliant material. Generous upper and lower drums are joined with large, external downcomer(s) allowing for maximum internal circulation. Tubes are a minimum 1.5” diameter, SA 178 Grade “A” material. Tube sizes up to 2.5” diameter are used for larger boilers. The Unilux housing is the most rigid available. Individual steel panels are manufactured with 11 gauge steel and reinforced by bending and welded stiffeners throughout. Refractory design is exclusive to Unilux. We utilize a three tier pour of different tolerance refractory for ultimate performance. All Unilux refractory is warranted for 5 years as standard. Finished insulated jacket panels are scratch resistant, polyester impregnated powder coat. Thermal losses from housing and jacket are 0.5 percent. The completed enclosure allows for up to +5” water column gas side pressure. All Unilux boilers are available with fuel burning equipment and control systems as desired.
Safety is paramount at Unilux. Every Unilux boiler has been engineered to be the safest, most efficient product available in its class.
At Unilux Boiler Corp., we engineer and manufacture bent water tube boilers of only the finest quality, built by experienced craftsmen and backed by a service history that is second to none. When others decline custom engineered projects, Unilux embraces the challenge with experienced, thought provoking ideas and the ability to assist engineers, contractors and end users with the most efficient, long lasting solutions to effectively meet their needs.
Richard Fisher of The Boiler Room: Unilux Advanced Manufacturing - Construction for all Unilux boilers starts with the vessel. All vessel material is controlled, ASME compliant material. Generous upper and lower drums are joined with large, external downcomer(s) allowing for maximum internal circulation. Tubes are a minimum 1.5” diameter, SA 178 Grade “A” material. Tube sizes up to 2.5” diameter are used for larger boilers. The Unilux housing is the most rigid available. Individual steel panels are manufactured with 11 gauge steel and reinforced by bending and welded stiffeners throughout. Refractory design is exclusive to Unilux. We utilize a three tier pour of different tolerance refractory for ultimate performance. All Unilux refractory is warranted for 5 years as standard. Finished insulated jacket panels are scratch resistant, polyester impregnated powder coat. Thermal losses from housing and jacket are 0.5 percent. The completed enclosure allows for up to +5” water column gas side pressure. All Unilux boilers are available with fuel burning equipment and control systems as desired.
Safety is paramount at Unilux. Every Unilux boiler has been engineered to be the safest, most efficient product available in its class.
At Unilux Boiler Corp., we engineer and manufacture bent water tube boilers of only the finest quality, built by experienced craftsmen and backed by a service history that is second to none. When others decline custom engineered projects, Unilux embraces the challenge with experienced, thought provoking ideas and the ability to assist engineers, contractors and end users with the most efficient, long lasting solutions to effectively meet their needs.
LBX and Sumitomo Sumitomo (S.H.I.) Construction Co., Ltd. Acquires
Fisher Capital News Update: Keep updated on recent events, press releases and latest machineries to avoid scam.
FISHER CAPITAL CONSTRUCTION MANAGEMENT - Construction Machineries, Suppliers Directory and Others --100% Ownership of LBX Company.
Sumitomo (S.H.I.) Construction Machinery Co., Ltd. (SCM), a leading manufacturer of hydraulic crawler excavators headquartered in Tokyo, Japan, announced today that effective as of April 30, 2010 it has acquired full ownership of LBX Company (LBX) headquartered in Lexington, KY.
LBX was originally formed as part of a global alliance between SCM and Case Corporation, and holds the manufacturing rights to SCM's excavator products in North and Latin America. LBX has been marketing and selling Sumitomo excavators, forestry, material handling and demolition products under the Link-Belt excavator brand name since the company's formation.
"This acquisition underscores SCM's dedication to LBX and the Link-Belt® excavator brand, and will contribute greatly to our success and expansion throughout North, South and Central America," stated Robert Harvell, CEO of LBX Company. "Over the years, our long-term relationship with SCM has been built on a solid foundation of providing superior product quality, innovative designs, and dedicated commitment to our dealer network and customers."
"We believe that this acquisition will allow both LBX and SCM to achieve our common long-term global growth strategies," said Kensuke Shimizu, President of Sumitomo Construction Machinery.
Since its formation, LBX has passed several growth milestones, including the creation of a corporate campus in Lexington, KY that includes a world-wide parts distribution center, product testing grounds, training facilities and testing and service bays. Additionally, the Link-Belt® excavator products have evolved to meet the needs of today's marketplace, including the introduction of new models such as the Link-Belt® 360 X2 Rubber Tire material handling excavator, which was unveiled at the ISRI Convention last week in San Diego, CA.
"We look forward to working very closely with SCM in the development of future products and our dealer network to further expand our position in the marketplace," Harvell said.
The management team of LBX will remain in place.
FISHER CAPITAL CONSTRUCTION MANAGEMENT - Construction Machineries, Suppliers Directory and Others --100% Ownership of LBX Company.
Sumitomo (S.H.I.) Construction Machinery Co., Ltd. (SCM), a leading manufacturer of hydraulic crawler excavators headquartered in Tokyo, Japan, announced today that effective as of April 30, 2010 it has acquired full ownership of LBX Company (LBX) headquartered in Lexington, KY.
LBX was originally formed as part of a global alliance between SCM and Case Corporation, and holds the manufacturing rights to SCM's excavator products in North and Latin America. LBX has been marketing and selling Sumitomo excavators, forestry, material handling and demolition products under the Link-Belt excavator brand name since the company's formation.
"This acquisition underscores SCM's dedication to LBX and the Link-Belt® excavator brand, and will contribute greatly to our success and expansion throughout North, South and Central America," stated Robert Harvell, CEO of LBX Company. "Over the years, our long-term relationship with SCM has been built on a solid foundation of providing superior product quality, innovative designs, and dedicated commitment to our dealer network and customers."
"We believe that this acquisition will allow both LBX and SCM to achieve our common long-term global growth strategies," said Kensuke Shimizu, President of Sumitomo Construction Machinery.
Since its formation, LBX has passed several growth milestones, including the creation of a corporate campus in Lexington, KY that includes a world-wide parts distribution center, product testing grounds, training facilities and testing and service bays. Additionally, the Link-Belt® excavator products have evolved to meet the needs of today's marketplace, including the introduction of new models such as the Link-Belt® 360 X2 Rubber Tire material handling excavator, which was unveiled at the ISRI Convention last week in San Diego, CA.
"We look forward to working very closely with SCM in the development of future products and our dealer network to further expand our position in the marketplace," Harvell said.
The management team of LBX will remain in place.
Monday, January 17, 2011
Fisher Capital Management: Government Bond Markets Global Outlook Part2
Fisher Capital Management: Government Bond Markets Global Outlook Part 2 - Our position remains unchanged; any existing exposure to bonds should be further reduced in favor of US & Euro equities.
The European Central Bank appears to share this view, although it has warned that the recovery “is likely to remain uneven”, and has kept short-term rates at very low levels. The bond markets have therefore continued to receive considerable support from the economic background and the actions of the central bank.
Fisher Capital Management Seoul, South Korea: However, these factors have been much less important than the fears about the debt problems in Greece and in other weaker members of the euro-zone. After considerable prevarication, due primarily to strong German opposition to a bail-out; an agreement has been reached amongst the member countries that, in conjunction with the IMF, they will provide support for Greece if this becomes necessary to prevent a defaulton its sovereign debts.
But the details of the agreement are very vague, and there is certainly no guarantee that the country can carry out its promises to introduce significant reductions in spending levels to reduce the size of its debts. The agreement has helped the country to issue a further ¤5 billion bond; but it was forced to offer an interest rate of 5.9% on a seven-year bond, 325 basis points above the equivalent German bund, and that issue has subsequently moved to a substantial discount. Conditions have also been made worse by the downgrade in Portugal’s credit rating, and so the pressures on the bond markets are continuing.
Fisher Capital Management Seoul, South Korea: The gilt edged market has coped fairly well so far with the latest weakness in the bond market, an inadequate response in the latest Budget to the debt problems in the UK, and a warning from the Fitch rating agency that the government’s timetable for reducing the fiscal deficit was “frankly too slow”, and that the country’s credit rating was at risk. The economic recovery remains very slow, and the Bank of England is holding short-term interest rates close to zero, so the market is receiving some support; but in all the circumstances it is perhaps surprising that it has managed to perform so well.
Fisher Capital Management Seoul, South Korea: The economic background in the UK remains depressed, but is slowly improving. Retail sales bounced back strongly; the public sector continued its recruitment programmed; and there has been a pickup in activity in both the manufacturing and service sectors of the economy.
It was not surprising therefore that the Bank of England kept short-term interest rates unchanged at the latest meeting of its Monetary Policy Committee and even suggested that it would be prepared to reactivate its quantitative easing programmed if this proved to be necessary. But this may not be enough to sustain gilt edged prices at current levels.
Fisher Capital Management Seoul, South Korea: The latest Budget statement is forecasting a slightly lower fiscal deficit of £167 billion in the 2009/10 fiscal year, and a halving of the deficit by 2013/14; but there is considerable skepticism in the markets about the growth assumptions underlying the figures, and about the willingness of the politicians to address the real problems
involved in reducing the deficit. If there is no credible plan to achieve this reduction, the country may well lose its AAA credit rating. Prospects have therefore become even more uncertain, and a move to higher yield levels seems unavoidable.
Fisher Capital Management Seoul, South Korea: The Japanese bond market is slightly weaker over the past month. It is likely that this year, for the first time, bond issuance may provide greater support for the fiscal deficit than tax revenues. This has already led to a downgrade on Japanese public debt by Standard and Poor’s, and with new bond issuance this year estimated to reach ¥44,300 billion, and to reach ¥55,300 billion by 2013, further downgrades seem likely. Japanese institutional investors are used to financing massive deficits, but it seems unlikely that deficits of this size can be adequately financed at present yield levels. Prospects for the Japanese market therefore remain unattractive.
The European Central Bank appears to share this view, although it has warned that the recovery “is likely to remain uneven”, and has kept short-term rates at very low levels. The bond markets have therefore continued to receive considerable support from the economic background and the actions of the central bank.
Fisher Capital Management Seoul, South Korea: However, these factors have been much less important than the fears about the debt problems in Greece and in other weaker members of the euro-zone. After considerable prevarication, due primarily to strong German opposition to a bail-out; an agreement has been reached amongst the member countries that, in conjunction with the IMF, they will provide support for Greece if this becomes necessary to prevent a defaulton its sovereign debts.
But the details of the agreement are very vague, and there is certainly no guarantee that the country can carry out its promises to introduce significant reductions in spending levels to reduce the size of its debts. The agreement has helped the country to issue a further ¤5 billion bond; but it was forced to offer an interest rate of 5.9% on a seven-year bond, 325 basis points above the equivalent German bund, and that issue has subsequently moved to a substantial discount. Conditions have also been made worse by the downgrade in Portugal’s credit rating, and so the pressures on the bond markets are continuing.
Fisher Capital Management Seoul, South Korea: The gilt edged market has coped fairly well so far with the latest weakness in the bond market, an inadequate response in the latest Budget to the debt problems in the UK, and a warning from the Fitch rating agency that the government’s timetable for reducing the fiscal deficit was “frankly too slow”, and that the country’s credit rating was at risk. The economic recovery remains very slow, and the Bank of England is holding short-term interest rates close to zero, so the market is receiving some support; but in all the circumstances it is perhaps surprising that it has managed to perform so well.
Fisher Capital Management Seoul, South Korea: The economic background in the UK remains depressed, but is slowly improving. Retail sales bounced back strongly; the public sector continued its recruitment programmed; and there has been a pickup in activity in both the manufacturing and service sectors of the economy.
It was not surprising therefore that the Bank of England kept short-term interest rates unchanged at the latest meeting of its Monetary Policy Committee and even suggested that it would be prepared to reactivate its quantitative easing programmed if this proved to be necessary. But this may not be enough to sustain gilt edged prices at current levels.
Fisher Capital Management Seoul, South Korea: The latest Budget statement is forecasting a slightly lower fiscal deficit of £167 billion in the 2009/10 fiscal year, and a halving of the deficit by 2013/14; but there is considerable skepticism in the markets about the growth assumptions underlying the figures, and about the willingness of the politicians to address the real problems
involved in reducing the deficit. If there is no credible plan to achieve this reduction, the country may well lose its AAA credit rating. Prospects have therefore become even more uncertain, and a move to higher yield levels seems unavoidable.
Fisher Capital Management Seoul, South Korea: The Japanese bond market is slightly weaker over the past month. It is likely that this year, for the first time, bond issuance may provide greater support for the fiscal deficit than tax revenues. This has already led to a downgrade on Japanese public debt by Standard and Poor’s, and with new bond issuance this year estimated to reach ¥44,300 billion, and to reach ¥55,300 billion by 2013, further downgrades seem likely. Japanese institutional investors are used to financing massive deficits, but it seems unlikely that deficits of this size can be adequately financed at present yield levels. Prospects for the Japanese market therefore remain unattractive.
Subscribe to:
Posts (Atom)